Learn, area by area
Each lesson explains one topic at up to four depths (Foundation, Practitioner, Advanced and Expert), with the governing formulas, an interactive calculator where it helps, notes per car category, and a quiz.
Vehicle Dynamics
Tyres
Slip angle, slip ratio, load sensitivity, camber thrust, temperature and pressure windows – the only contact the car has with the track.
Weight Transfer & Balance
Lateral and longitudinal load transfer, LLTD, roll centres, the understeer gradient and the g-g diagram.
Suspension Geometry & Kinematics
Motion ratio, roll centre, camber gain, bump steer, anti-dive/anti-squat, caster and scrub.
Springs, Anti-roll Bars & Heave
Wheel rates, ride frequency, roll stiffness distribution, third/heave elements, packers and bump rubbers.
Dampers
Damper curves, low vs high speed, damping ratio, histograms, transient balance and kerb behaviour.
Steering & Ackermann
Ackermann geometry, toe, steering ratio, kingpin geometry, self-aligning torque and steering feel.
Aerodynamics
Downforce, drag, aero balance, ride-height sensitivity, platform control, coast-down testing.
Powertrain
Brakes
Brake balance, pedal force & travel, lock-up, ABS, temperatures, brake migration and engine braking.
Engine & Hybrid
Torque, power, drivability, throttle maps, BoP restrictions, hybrid deployment and fuel.
Gearbox & Gearing
Ratio selection, gear charts, shift points, top speed vs acceleration, sequential gearboxes.
Differential
Open, LSD, ramp angles, preload, plates, entry vs exit locking and its effect on yaw.