Learn / Brakes
Powertrain

Brakes

Brake balance, pedal force & travel, lock-up, ABS, temperatures, brake migration and engine braking.

Starting at L2 · Practitioner

Brake bias in practice: balance bar, master cylinders, in-car adjust & migration

How the hydraulic bias is actually set — balance bar position, master-cylinder sizes, driver adjusters — how to measure it with pressure sensors, and how brake-by-wire migration in hybrid prototypes changes the bias through the braking event.

L1L2L3

Braking analysis with data: quickness, effort, brake points, release & pedal travel

The standard data toolkit for braking (Segers ch. 5): how fast the driver builds deceleration, how much of the available grip is used, where the brake point is and why it moves, how the release blends into cornering, and what pedal travel and pressure reveal about the hardware.

L1L2L3

Lock-up diagnosis: front vs rear, wheel speed vs reference speed

Detect and classify lock-ups from wheel speeds against a reliable vehicle reference speed, then separate bias, technique, platform and powertrain causes.

L1L2L3

ABS in GT3 & Cup cars: maps, interaction with balance, and what it hides

Motorsport ABS keeps each wheel near its optimum slip, but it doesn't make brake balance irrelevant. Learn to read ABS activity, choose maps, and spot when ABS is masking a setup problem.

L1L2L3

Brake temperatures & cooling: windows, carbon vs iron, ducts, glazing

Brakes convert ~1 MJ per front disc in a big stop into heat. Disc and pad compounds work in temperature windows; ducting, compound choice and bias keep them there. Brake heat also feeds tyre temperatures and pressures.

L1L2L3

Engine braking, downshifts & rear stability on entry (diff, hybrid regen, brake-by-wire)

The rear axle's braking on entry is not only the rear brakes: engine braking, downshift transients, the differential and (on hybrids) regeneration all add rear torque. Managing their sum is the key to a stable but rotating car on entry.

L1L2L3