Scenarios / LMDh at Sebring: rear instability on entry from brake-by-wire blending
L3 · AdvancedPorsche 963 (LMDh) · Hypercar (LMH/LMDh)
LMDh at Sebring: rear instability on entry from brake-by-wire blending
Track
Sebring International Raceway
Session
IMSA 12 Hours, FP2
Conditions
Dry, 28 °C air, 42 °C track, bumpy
Tyres
Michelin slicks
Driver“Into T7 and the hairpin the rear does something weird in the last part of the braking — like the rear brakes suddenly come in. Not consistent, some laps fine, some laps it jumps sideways.”
On the data screen
| T7 braking zone | Value |
|---|---|
| Rear MGU regen torque (rear axle, through gearbox) | ramps down from max as speed falls / on downshifts |
| Rear hydraulic pressure (BBW) | increases to compensate for regen fade |
| Total rear brake torque (regen + hydraulic + engine braking) | spikes +12% at 2 points coinciding with downshifts |
| Rear wheel slip | peak 9% at spikes (target < 5%) |
| Battery state of charge | Spikes occur more when SoC is high (regen limited) |
Decision 1 / 3
What is the most likely mechanism?