Porsche 963 (LMDh)
Porsche's LMDh prototype (2023 on). It sits on a Multimatic LMP2-based spine with Porsche bodywork and a 4.6 L twin-turbo V8 (derived from the 918 Spyder engine). Every LMDh car uses the same spec hybrid: a Bosch 50 kW MGU integrated in the spec Xtrac P1359 7-speed gearbox and a Williams Advanced Engineering 1.35 kWh, 800 V battery. The car is rear-wheel drive only. Combined power at the wheels is capped and balanced by BoP (e.g. 508 kW, Qatar 2025), and so is weight (e.g. 1,064 kg).
Compared with an LMH such as the 499P, an LMDh can race in both IMSA and WEC on one homologation, and the 963 did so from 2023 to 2025. After Porsche Penske's factory WEC exit and Proton's decision not to enter, no 963 races in WEC in 2026; it continues in IMSA GTP. The spec hybrid makes energy strategy simpler, but it still matters. The main engineering topics are brake-by-wire with rear regen, tyre management (no warmers in WEC), and the aero platform within the homologated window.
Specification
| Mass | BoP-set; base 1,030 kg; e.g. 1,064 kg (WEC 2025 Qatar BoP) |
| Power | Combined ICE + MGU capped by BoP (e.g. 508 kW Qatar 2025) |
| Engine | Porsche 9RD 4.6 L twin-turbo V8 |
| Gearbox | Xtrac P1359 7-speed sequential (spec LMDh), MGU integrated |
| Differential | Limited-slip (spec LMDh driveline) |
| Tyres | Michelin (IMSA and WEC); no tyre warmers in WEC |
| Aero | Homologated bodywork within ACO/IMSA aero window; limited adjustable aero |
| Brakes | Carbon discs; brake-by-wire with rear regen |
| Electronics | Spec Bosch hybrid control; TC permitted, ABS not permitted |
| Chassis | Multimatic carbon monocoque; wheelbase 3,148 mm; double wishbone pushrod |
| Hybrid | Spec Bosch 50 kW MGU (rear, in gearbox), WAE 1.35 kWh 800 V battery |
Regulations & BoP
- LMDh (ACO/IMSA): spec LMP2-based chassis from one of four constructors (Multimatic for Porsche) with manufacturer bodywork and engine; spec hybrid (Bosch MGU, WAE battery, Xtrac gearbox).
- BoP: weight, power, stint energy and refuelling time; converged between IMSA GTP and WEC Hypercar. The WEC figures quoted (Qatar 2025) are for orientation: from 2026 WEC BoP tables are no longer published.
- No ABS; traction control permitted.
- Tyres: Michelin; no tyre warmers in WEC.
Engineering focus
- Brake-by-wire and rear regen blending vs driver feel
- Tyre warm-up and degradation with no warmers (WEC)
- Aero platform within the homologated window
- Energy and fuel strategy within BoP stint energy
- IMSA-specific running: Michelin tyres under IMSA rules, Daytona banking, Sebring bumps, IMSA BoP (the 2023–2025 IMSA + WEC dual programme is now history)
What can be adjusted
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Anti-roll bars (front / rear) | Within homologated parts | ● Free | Mid-corner balance tool. The car is RWD only, so the rear ARB has a big effect on slow-corner traction. |
| Springs and heave elements | Within homologated parts | ● Free | Platform control under aero load. A stiffer front heave keeps the floor stable at high speed. Bumpy IMSA tracks (Sebring) need much softer heave than Le Mans or Fuji. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Dampers | Within homologated parts; clicks free | ● Free | Platform and kerbs. Sebring, Daytona (banking) and Le Mans need very different HS settings. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Ride heights / rake | Within plank rules and homologated aero window | ◐ Limited | Main aero balance tool. With downforce capped by the window, rake sets balance and pitch sensitivity. |
| Camber | Within mechanical range and Michelin limits | ● Free | Balance peak grip against warm-up (no warmers in WEC) and wear over double stints. |
| Minimum weight (BoP) | BoP weight | ◆ BoP / homol. | Not a setup item. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Toe (front / rear) | — | ● Free | Rear toe-in for stability under regen braking and power-down. Front toe for turn-in and warm-up. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Rear wing / adjustable aero | Within the homologated range | ◐ Limited | Balance trim within the window. |
| Aero configuration (Le Mans vs standard) | Homologated; BoP-dependent | ◆ BoP / homol. | Le Mans BoP and drag level differ from other events. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Brake-by-wire / regen blending | Calibration within regulations | ◐ Limited | Rear regen and friction are blended electronically. A poor blend shows up as rear instability or inconsistent pedal, especially when the battery is full and regen is limited. |
| Brake bias | Driver-adjustable | ● Free | Rear regen adds rear braking torque, so the effective balance differs from the hydraulic bias. Analyse total axle torque. |
| Brake ducts | Homologated ducts; blanking allowed | ◐ Limited | Carbon brakes need temperature, especially at night and in IMSA's cooler races. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Traction control | Driver-adjustable TC | ● Free | TC permitted, ABS not. Like an LMH below its front-deployment speed, the 963 is RWD on every slow exit, so TC and rear roll stiffness are the main traction tools. Rear MGU torque blending also affects how the TC cut feels. |
| Hybrid deployment / regen | Spec hybrid; deployment within regulations | ◐ Limited | Energy management: when to deploy and where to recover. Simpler than LMH front-axle systems, but still worth lap time and fuel. |
| Power (BoP) | BoP-set | ◆ BoP / homol. | Not a setup item. |
| Energy per stint (BoP) | e.g. 909 MJ (Qatar 2025) | ◆ BoP / homol. | Sets stint length and fuel-save targets. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Gear ratios | Spec Xtrac ratios | ◆ BoP / homol. | Not adjustable. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Differential | Within spec driveline parts | ◐ Limited | Entry stability vs rotation. With rear regen on entry, diff coast behaviour and regen interact. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Tyre pressures | Within Michelin limits | ● Free | No warmers in WEC: start pressures and out-lap procedure are critical. IMSA has its own rules. |
| Tyre allocation | Limited sets per event | ◆ BoP / homol. | Plan double/triple stints. |
Typical complaints & first tools
| Driver / car issue | Usual first fix |
|---|---|
| Rear instability under braking | Review brake-by-wire/regen calibration, then bias forward and rear toe-in |
| Wheelspin on slow exits (RWD) | TC up one step, soften rear ARB, review diff |
| High-speed understeer | Check front ride height at speed against the aero map. If above the stall region: soften front heave / remove front packer or stiffen rear heave to keep rake, lower front ride height. Stiffen the front only if the floor stalls or grounds |
| Slow tyre warm-up | Raise start pressures, more toe/camber, coach out-lap |
| Stint energy over target | Lift-and-coast targets per corner, revise deployment |