Dampers
Damper curves, low vs high speed, damping ratio, histograms, transient balance and kerb behaviour.
Starting at L1 · Foundation
Damper fundamentals: force vs velocity, bump vs rebound
A damper produces force from shaft velocity, not displacement. Its force–velocity curve (shape, bump/rebound asymmetry, knee) is what you tune; it only acts while the suspension is moving.
Low-speed vs high-speed damping: body vs wheel
"Low" and "high" speed refer to damper shaft velocity, not car speed. Low-speed damping controls body motion from driver inputs and aero; high-speed damping controls the wheel over bumps and kerbs.
Damping ratio and critical damping (body and wheel)
Damping ratio ζ normalises the damper coefficient against mass and stiffness. Race cars typically run a body damping index ζ ≈ 0.6–0.8 at low shaft speed and wheel ζ ≈ 0.3–0.5 at high shaft speed – single-corner indices for comparing setups, not the true modal damping of the car.
Starting at L2 · Practitioner
Damper velocity histograms, box plots and run charts
The shock-speed histogram characterises each damper as installed on the car. Symmetry, zero-bin height, % time in low/high-speed bump and rebound, and statistics like standard deviation, skewness and kurtosis turn it into objective metrics you can track lap by lap.
Dampers and transient balance: entry and exit
While the body is rolling and pitching, damper forces add to the spring forces and change how load transfer is distributed front to rear. Low-speed bump and rebound, front vs rear, are therefore the tools for entry and exit balance – not for mid-corner.
Kerb riding and high-speed damping control
Kerbs and big bumps drive shaft velocities to several hundred mm/s. High-speed bump lets the wheel climb without launching the car, high-speed rebound returns it to the ground without bouncing, and the whole package (springs, bump stops, ARBs, ride height) decides whether the car can use kerbs.
Practise: scenarios
- Imola: the car launches off the Variante Alta kerb L3
- Portimão: snap oversteer under braking over the crest L3
- Sebring Turn 17: the front grounds on the bumps L3
- Macau Guia: diff and platform compromise for a FWD TCR L4
- LMP2 at Sebring: heave spring choice and the damper histogram L3
- GTP at Long Beach: locking the fronts over the T1 bumps L4
- F2 at Baku: reading the damper histogram on a street circuit L4
- Super Formula at Fuji: bouncing at speed and the aero platform L3