Scenarios / LMP2 at Sebring: heave spring choice and the damper histogram
L3 · AdvancedOreca 07 (LMP2) · LMP2
LMP2 at Sebring: heave spring choice and the damper histogram
Track
Sebring International Raceway
Session
IMSA FP2, long run
Conditions
Dry, 30 °C air, 45 °C track
Tyres
Spec slicks, 10 laps old
Driver“Over the T17 bumps the car is jumping around, I can't put the power down. T1 too, the concrete patches. In the fast stuff it's okay but over the bumps the rear feels like a pogo stick.”
On the data screen
Damper velocity histogram, full lap (low/high speed split at 25 mm/s):
| Corner | Rebound high % | Rebound low % | Bump low % | Bump high % | Mean speed reb / bump (mm/s) |
|---|---|---|---|---|---|
| FL | 14 | 36 | 35 | 15 | 32 / 32 |
| FR | 15 | 35 | 36 | 14 | 33 / 33 |
| RL | 10 | 42 | 30 | 18 | 29 / 31.4 |
| RR | 9 | 43 | 30 | 18 | 28 / 30.3 |
Rear damper position through the T17 bump sequence: the mean position drifts ~6 mm into bump over 4–5 bumps until the rear heave element sits on the packer (flat spots on the trace); it recovers on the following straight. Rear wheel load spikes +40% at each packer contact.
Decision 1 / 3
What do the histogram and the position trace tell you about the rear?