Engineering toolbox
Trackside calculators
Motion ratio & wheel rateRide frequencyRoll stiffness & roll gradientLoad transfer & corner loadsAckermann steeringAero balanceBrake balanceGearing & gear chartDamping ratioCornering speed with downforceFuel & stint planner
Motion ratio & wheel rate
Convert spring, damper and anti-roll bar rates to the wheel through the installation ratio (k·MR²), including pushrod/rocker geometry.
Wheel rate from installation ratio
MR appears squared: once for the force lever (spring force → wheel force) and once for the displacement lever.
Geometry
Spring, damper, anti-roll bar
Results
Effective MR
0.750
MR² = 0.563
Spring wheel rate
101.3 N/mm
Damping at wheel
4500 N·s/m
ARB roll-mode rate per wheel
108.0 N/mm
single-wheel 54.0 N/mm
Wheel moves 1.33 mm per 1 mm of spring travel. A 10 mm wheel bump compresses the spring 7.5 mm. The ARB single-wheel rate (k·MR², opposite wheel held fixed) is what one wheel feels over a one-sided bump. In pure roll both ends move in opposite directions, the bar twists twice as much, so the roll-mode rate per wheel is 2·k·MR² – use that value as “ARB roll-mode rate per wheel” in the roll-stiffness calculator.