Engineering toolbox
Trackside calculators
Motion ratio & wheel rateRide frequencyRoll stiffness & roll gradientLoad transfer & corner loadsAckermann steeringAero balanceBrake balanceGearing & gear chartDamping ratioCornering speed with downforceFuel & stint planner
Roll stiffness & roll gradient
Compute per-axle roll stiffness from springs, ARBs and tyres, the front roll-stiffness distribution and the resulting roll gradient.
Axle roll stiffness and roll gradient
Rates are wheel rates (N/mm × 1000 → N/m), t in metres. KARB is the bar’s roll-mode rate per wheel (both wheels moving opposite), i.e. twice its single-wheel rate: a bar rated k·MR² with the opposite end fixed contributes k·MR²·t² to Kφ. Tyre roll stiffness uses the tyre vertical rate in the same way and acts in series. h is the sprung CG height above the roll axis.
Inputs
Front axle
Rear axle
Results
| Axle | Springs [N·m/deg] | ARB [N·m/deg] | Suspension [N·m/deg] | Incl. tyres [N·m/deg] |
|---|---|---|---|---|
| Front | 2851 | 1425 | 4276 | 2824 |
| Rear | 3128 | 670 | 3798 | 2602 |
Total roll stiffness
5426 N·m/deg
Front distribution
52.0 %
of total roll stiffness
Roll gradient
0.82 deg/g
Incl. gravity (m·g·h·φ) term
0.84 deg/g
φ/A = W h / (Kφ − W h)
Typical roll gradients: road cars 3–6 deg/g, GT3 ~0.5–1.2 deg/g, downforce single-seaters 0.2–0.6 deg/g.