Engineering toolbox

Trackside calculators

Load transfer & corner loads

Split lateral load transfer into geometric, elastic and unsprung components per axle and see the resulting LLTD and four corner loads.

Lateral load transfer per axle (three components)
ΔFzF=msFAyzFtF⏟geometric+msAy(hs−zRA)tF KϕFKϕF+KϕR⏟elastic+muFAyhutF⏟unsprung\Delta F_{zF} = \underbrace{\frac{m_{sF} A_y z_F}{t_F}}_{\text{geometric}} + \underbrace{\frac{m_s A_y (h_s - z_{RA})}{t_F}\,\frac{K_{\phi F}}{K_{\phi F}+K_{\phi R}}}_{\text{elastic}} + \underbrace{\frac{m_{uF} A_y h_u}{t_F}}_{\text{unsprung}}ΔFx=m Ax hLLLTD=ΔFzFΔFzF+ΔFzR\Delta F_{x} = \frac{m\,A_x\,h}{L} \qquad LLTD = \frac{\Delta F_{zF}}{\Delta F_{zF} + \Delta F_{zR}}
Geometric transfer goes through the roll centres instantly (no roll); elastic transfer goes through springs/ARBs and is split by roll-stiffness distribution. The roll moments of the three components (ΔF·t) always sum to m·Ay·h over both axles – only the split between geometric, elastic and unsprung, and between the axles, is tunable.
Inputs
Lateral load transfer
AxleGeometric [N]Elastic [N]Unsprung [N]Total [N]Total [kg]
Front15218502182219226
Rear37015612502181222
LLTD (front share)
50.4 %
Sprung CG height
0.468 m
Roll arm (hs − zRA)
0.406 m
Longitudinal transfer
0 N
0 kg onto front
Corner loads (bar = load, dashed = static)
FRONT← insideoutside →84 kgFront in (−226 kg)537 kgFront out (+226 kg)142 kgRear in (−222 kg)587 kgRear out (+222 kg)
CornerLoad [N][kg]
Front in82784
Front out5265537
Rear in1395142
Rear out5757587

Aerodynamic downforce is not included. Load transfers are superimposed (lateral + longitudinal).

Theory: Load sensitivity: why load transfer costs grip · Lateral load transfer and its three components · Longitudinal load transfer, pitch and anti-geometry · LLTD, the "magic number" and mechanical balance · Total wheel loads: aero, transfer and estimation from data