Engineering toolbox
Trackside calculators
Motion ratio & wheel rateRide frequencyRoll stiffness & roll gradientLoad transfer & corner loadsAckermann steeringAero balanceBrake balanceGearing & gear chartDamping ratioCornering speed with downforceFuel & stint planner
Ride frequency
Combine wheel rate and tyre rate into ride rate and natural frequency for both axles, compared with typical ranges per car category.
Ride rate and natural frequency
Wheel rate and tyre rate act as springs in series; the sprung corner mass rides on the result.
Inputs (per corner)
Front
Rear
Category reference
Typical GT / GT3: 2–3 Hz. Moderate downforce; platform control vs. kerb compliance.
Results
Front ride rate
89.4 N/mm
Rear ride rate
101.6 N/mm
Front frequency
2.92 Hz
3.39 Hz ignoring tyre
Rear frequency
2.84 Hz
3.33 Hz ignoring tyre
Front / rear frequency ratio
1.031
Front is 3.1 % higher than rear
Tyre share of compliance (front / rear)
26 / 27 %
fraction of ride deflection taken by the tyre
Road cars traditionally run the rear ~10–20 % stiffer in frequency than the front (flat ride over bumps at speed). High-downforce cars often run the front stiffer to protect front ride height and aero platform. Green = inside the selected category range.