Engineering toolbox
Trackside calculators
Motion ratio & wheel rateRide frequencyRoll stiffness & roll gradientLoad transfer & corner loadsAckermann steeringAero balanceBrake balanceGearing & gear chartDamping ratioCornering speed with downforceFuel & stint planner
Brake balance
Compare your brake bias with the ideal front brake-force share across deceleration levels and see which axle locks first.
Ideal brake force distribution
The ideal front brake-force share equals the front share of vertical load during the stop, so both axles reach the friction limit together. With downforce D (front share AB) the numerator gains D·AB and the denominator gains D.
Inputs
Results
Ideal front bias
72.7 %
at 1.60 g
Set − ideal
-10.7 % pts
Locks first
rear locks first
Set bias is ideal at
0.96 g
| Decel [g] | Front load [kg] | Ideal front bias [%] | Set [%] | Behaviour at set bias |
|---|---|---|---|---|
| 0.50 | 734 | 54.3 | 62.0 | front locks first |
| 0.75 | 790 | 58.5 | 62.0 | front locks first |
| 1.00 | 846 | 62.7 | 62.0 | rear locks first |
| 1.25 | 902 | 66.8 | 62.0 | rear locks first |
| 1.50 | 959 | 71.0 | 62.0 | rear locks first |
| 1.75 | 1015 | 75.2 | 62.0 | rear locks first |
| 2.00 | 1071 | 79.3 | 62.0 | rear locks first |
| 2.25 | 1127 | 83.5 | 62.0 | rear locks first |
| 2.50 | 1184 | 87.7 | 62.0 | rear locks first |
Bias above ideal → fronts lock first (stable, understeer, flat-spotted fronts). Bias below ideal → rears lock first (unstable, car snaps into oversteer). As deceleration falls (the driver bleeding off pressure into the corner) the longitudinal transfer and therefore the ideal front share fall, which is why trail-braking on a forward bias is safe. At the grip limit, where deceleration falls with total load so the transfer share μh/L stays constant, falling downforce pulls the ideal toward the static weight split (forwards if the aero balance is rearward of the static front weight, rearwards if it is forward of it). Here deceleration is a separate input: at a fixed deceleration, less downforce pulls the ideal toward wF + (h/L)(ax/g). The value here is brake force split at the ground — the pressure/bias figure on the dash also depends on caliper piston area, pad μ and effective disc radius per axle.
Theory: Braking physics, longitudinal load transfer & ideal brake balance