Engineering toolbox

Trackside calculators

Gearing & gear chart

Speed per gear at the shift point, rpm drop after each upshift and a sawtooth speed-vs-rpm gear chart.

Road speed per gear
v=2π n60 rrolligear iFD  [m/s]nafter=nshift in+1inv = \frac{2\pi\,n}{60}\,\frac{r_{roll}}{i_{gear}\,i_{FD}}\ \ [\text{m/s}] \qquad n_{after} = n_{shift}\,\frac{i_{n+1}}{i_{n}}
n in rpm, rroll = dynamic rolling radius (loaded, at speed). Multiply m/s by 3.6 for km/h. Tyre slip is ignored.
Driveline
Gear ratios
Results
GearOverall ratiov @ shift [km/h]v @ max [km/h]rpm after upshiftrpm dropStep
111.41296.9102.6614023601.384
28.244134.1142.0671817821.265
36.516169.7179.6695015501.223
45.328207.5219.7723612641.175
54.536243.7258.1728612141.167
63.888284.3301.1———
Top speed (rev-limited)
301.1 km/h
Speed per 1000 rpm, top
33.45 km/h
Overall spread (1st / top)
2.94
02000400060008000050100150200250300350road speed [km/h]engine [rpm]shift 8500123456

Thin grey lines: each gear to the rev limit. Blue sawtooth: shifting at the shift point. The best upshift point is where the wheel force in the next gear equals that in the current gear (crossing of the torque × overall-ratio curves); for most race engines that is at or just below the limiter, so the rpm after the shift lands in the upper power band. Steps get smaller in higher gears (progressive gearing) because drag absorbs more of the power there.

Theory: The gear chart & the total-gear-ratio math channel