The engaged pair: the only gears carrying the driveUpshift 3→4 at 8500: lands at 6923 rpm (×0.814)A six-speed dog-ring sequential gearbox on a bench, casing cut away. The motor turns the input shaft; every driver gear spins freely on it until the selector barrel slides a dog ring against it, so only the lit pair carries the drive while the others idle at their own speeds. Ratios are tooth counts (1st 12/38 = 3.17, 2nd 14/32 = 2.29, 3rd 16/29 = 1.81, 4th 21/31 = 1.48, 5th 23/29 = 1.26, 6th 24/26 = 1.08); the 10/36 pinion and crown wheel add a 3.60 final drive, so with a 0.345 m rolling radius v = 0.377·r·n / (i·3.60). Changing gear at constant road speed moves the engine to n × i(next) ÷ i(now): from 8500 rpm, 1→2 lands at 6135 and 5→6 at 7303. The chart is the gear chart: each gear is a line through the origin, the sawtooth is shifting at 8500 rpm and the bold drop is the next upshift; the bars put engine, output-shaft and wheel rpm on one scale, so their gaps are the gear ratio and the final drive. Speed is held inside 3000–9000 rpm for the gear; picking a lower gear brakes first. Shifts are shown slowed; a real one takes 30–50 ms.