020406080100 FRONT 0 REAR 0bar40455055606570BIAS % FRONT50.0▽ force split 50.0
REAR MC BORE
The balance bar: where the pedal's pivot sits on it sets the force splitSame scale: front and rear line pressure; needle = pressure bias, ▽ = force splitA floor-mounted pedal box, pedal ratio about 4.5:1. A ram pushes the pad like the driver's foot; the pedal pushes a threaded balance bar through a spherical bearing, and the bar's clevises, 60 mm apart, push the front and rear master cylinders. Moments about the pivot split the pushrod force: front share = rear arm ÷ (front arm + rear arm). The adjuster screws the bar across the pedal, 1 mm per turn (±4 mm), so each turn moves the split by 1.7 %. Each cylinder turns its force into pressure, p = F/A: the .750″ front bore (285 mm²) against a rear of .750″ (285 mm²), .813″ (335 mm²), .875″ (388 mm²). A bigger bore makes less pressure from the same force, so with the bar centred the bias, p front ÷ (p front + p rear), reads 50.0 %, 54.0 %, 57.6 %. The bar tilts a few degrees because the front circuit takes more fluid.