Learn / Weight Transfer & Balance / LLTD, the "magic number" and mechanical balance
L2 · Practitioner

LLTD, the "magic number" and mechanical balance

The front share of total lateral load transfer (LLTD) is the main mechanical balance parameter. A commonly quoted starting point is front LLTD about 5 points above static front weight, but the right number depends on tyres, drivetrain, aero and driver.

LLTD, the "magic number" and mechanical balance: L1 Foundation explanation

Lateral load transfer distribution (LLTD), also called TLLTD (total LLTD), is the fraction of the total lateral load transfer carried by the front axle:

LLTDf=ΔFz,f tfΔFz,f tf+ΔFz,r tr≈ΔFz,fΔFz,f+ΔFz,r  (tf≈tr)\text{LLTD}_f = \frac{\Delta F_{z,f}\,t_f}{\Delta F_{z,f}\,t_f + \Delta F_{z,r}\,t_r} \approx \frac{\Delta F_{z,f}}{\Delta F_{z,f} + \Delta F_{z,r}} \;(t_f \approx t_r)

Because of tyre load sensitivity, the axle that carries the larger share of load transfer loses relatively more grip:

  • Higher front LLTD → more understeer (steady state).
  • Lower front LLTD → more oversteer.

Compare LLTD with the static front weight fraction. If the front carries 45% of the weight and 45% of the load transfer, both axles are equally "punished", so balance is set by other things (tyre sizes, aero, geometry). The "magic number" associated with Milliken's work is a starting point of roughly front LLTD ≈ static front weight % + 5%, which builds in mild understeer for stability, especially in a RWD car that also needs rear capacity for traction.

Main levers:

LeverLLTD effect
Front ARB stiffer / rear ARB softerLLTD up (more understeer)
Front springs stifferLLTD up (and changes ride, aero platform)
Front roll centre higherLLTD up (geometric)
Rear track widerAt constant rear roll stiffness (springs/bars re-rated): less ΔF per rear tyre, which helps rear grip; moment-based LLTD unchanged. With the same wheel rates KϕrK_{\phi r} rises ∝ tr2t_r^2, the rear takes more of the roll moment and front LLTD falls slightly

ARBs are the preferred tool: they change roll stiffness with little effect on heave/pitch stiffness, so the aero platform is largely unchanged.

Key formulas

Front lateral load transfer distribution
LLTDf=ΔFz,f tfΔFz,f tf+ΔFz,r tr\text{LLTD}_f = \dfrac{\Delta F_{z,f}\,t_f}{\Delta F_{z,f}\,t_f + \Delta F_{z,r}\,t_r}
Roll stiffness distribution
q=KϕfKϕf+Kϕrq = \dfrac{K_{\phi f}}{K_{\phi f} + K_{\phi r}}
KϕK_\phi
axle roll stiffness at the wheels (Nm/deg), suspension and tyres combined in series
Axle roll stiffness from wheel rate and ARB
Kϕ=π180 t22(kw+karb,w)K_{\phi} = \dfrac{\pi}{180}\,\dfrac{t^2}{2}\left(k_{w} + k_{arb,w}\right)
kwk_w
spring wheel rate per side (N/m)
karb,wk_{arb,w}
equivalent per-side wheel rate of the bar in pure roll (N/m); if the bar rate is quoted per unit of relative left–right wheel travel, use 2× that value
t
track (m)
KϕK_\phi
suspension roll stiffness (Nm/deg); combine in series with the tyres, (π/180)·k_t t²/2 in Nm/deg, for the axle value
"Magic number" starting point
LLTDf≈Ψf+0.05\text{LLTD}_f \approx \Psi_f + 0.05
Ψf\Psi_f
static front weight fraction
Interactive

Load transfer & corner loads

Split lateral load transfer into geometric, elastic and unsprung components per axle and see the resulting LLTD and four corner loads.

Lateral load transfer per axle (three components)
ΔFzF=msFAyzFtF⏟geometric+msAy(hs−zRA)tF KϕFKϕF+KϕR⏟elastic+muFAyhutF⏟unsprung\Delta F_{zF} = \underbrace{\frac{m_{sF} A_y z_F}{t_F}}_{\text{geometric}} + \underbrace{\frac{m_s A_y (h_s - z_{RA})}{t_F}\,\frac{K_{\phi F}}{K_{\phi F}+K_{\phi R}}}_{\text{elastic}} + \underbrace{\frac{m_{uF} A_y h_u}{t_F}}_{\text{unsprung}}ΔFx=m Ax hLLLTD=ΔFzFΔFzF+ΔFzR\Delta F_{x} = \frac{m\,A_x\,h}{L} \qquad LLTD = \frac{\Delta F_{zF}}{\Delta F_{zF} + \Delta F_{zR}}
Geometric transfer goes through the roll centres instantly (no roll); elastic transfer goes through springs/ARBs and is split by roll-stiffness distribution. The roll moments of the three components (ΔF·t) always sum to m·Ay·h over both axles – only the split between geometric, elastic and unsprung, and between the axles, is tunable.
Inputs
Lateral load transfer
AxleGeometric [N]Elastic [N]Unsprung [N]Total [N]Total [kg]
Front15218502182219226
Rear37015612502181222
LLTD (front share)
50.4 %
Sprung CG height
0.468 m
Roll arm (hs − zRA)
0.406 m
Longitudinal transfer
0 N
0 kg onto front
Corner loads (bar = load, dashed = static)
FRONT← insideoutside →84 kgFront in (−226 kg)537 kgFront out (+226 kg)142 kgRear in (−222 kg)587 kgRear out (+222 kg)
CornerLoad [N][kg]
Front in82784
Front out5265537
Rear in1395142
Rear out5757587

Aerodynamic downforce is not included. Load transfers are superimposed (lateral + longitudinal).

Trackside takeaways

  • Front LLTD up = understeer; down = oversteer (steady state, mechanical corners).

  • Starting point: front LLTD ≈ static front weight + ~5 points. It is a heuristic, adjusted for tyres, drivetrain and driver.

  • ARBs change LLTD with minimal heave/pitch change, so they are the platform-friendly balance tool.

  • LLTD ≠ roll stiffness distribution: unsprung and geometric terms move it by several points.

  • Packers/bump rubbers in roll make LLTD speed- and g-dependent on aero cars.

On your car

Front-engined (e.g. BMW M4, AMG) and mid-engined (296, Huracán) GT3s have quite different static front weight, so their LLTD targets differ. ARB blade/position changes are the standard mid-corner balance tools, with BoP-fixed aero leaving mechanical balance to do much of the work.

Check yourself

Question 1 / 4L2 · Practitioner

A RWD car with 44% static front weight runs 43% front LLTD and is oversteery mid-corner in slow corners. Using the "magic number" heuristic, which direction and approximate target?

Further reading
  • Milliken & Milliken – Race Car Vehicle Dynamics — Ch. 18 Wheel Loads · TLLTD and the "magic number" starting point
  • Milliken & Milliken – Race Car Vehicle Dynamics — Ch. 7 Steady-State Pair Analysis
  • Milliken & Milliken – Race Car Vehicle Dynamics — Ch. 16 Ride and Roll Rates
  • Segers – Analysis Techniques for Racecar Data Acquisition — §10.1 Lateral Weight Transfer · Roll-ratio index (Eq. 10.13); see its limits on a stiff chassis
  • Segers – Analysis Techniques for Racecar Data Acquisition — §9.4 Front to Rear Roll Angle Ratio