Damper velocities on a street circuit
Situation. FIA F2 at Porto Alto street circuit (manhole covers, patched tarmac). One lap of data. Your damper engineer wants to know which part of the damper curve matters here before choosing clicks.
Reference (same car, same model, at Monza): damper FL velocity RMS ≈ 25 mm/s (≈ 16.5 mm/s with the kerb strikes removed), 1st/99th percentile ≈ −34/+35 mm/s, only ~8 % of the lap time above |25| mm/s.
Your task. Inspect damperFL and damperRR around the lap together with speed. Where are the highest velocities, and why there? Compare with the Monza reference and decide which damper ranges to focus on. (Sign convention: positive = bump/compression.)
Note: the simulated chicanes have apex kerbs (Porto Alto T6/T7; at Monza the Rettifilo, Roggia and Ascari). Their strikes give the >200 mm/s peaks – exclude or segment them before you judge road roughness, as you would with real data.
| Corner | Brake pt [m] | Entry [km/h] | Min [km/h] | Exit +100 m [km/h] | Segment [s] |
|---|---|---|---|---|---|
| T1 Harbour | 106 | 280 | 67.4 | 180 | 14.830 |
| T2 Church | 66 | 202 | 63.7 | 179 | 6.789 |
| T3 Market | 52 | 185 | 71.0 | 181 | 6.016 |
| T4 Hotel hairpin | 90 | 232 | 44.1 | 173 | 9.585 |
| T5 Tunnel kink | — | 233 | 233.1 | 267 | 7.978 |
| T6 Seafront chicane (L) | 102 | 288 | 84.5 | 161 | 10.279 |
| T7 Seafront chicane (R) | 6 | 104 | 84.5 | 186 | 1.562 |
| T8 Fountain | 58 | 219 | 99.9 | 191 | 7.950 |
| T9 Final | 64 | 207 | 74.5 | 183 | 6.336 |
Your analysis
For this lap, damper FL has an RMS of ~33 mm/s (~31 mm/s without the chicane kerbs) and ~38 % of the lap time above |25| mm/s, with road peaks of ~±120 mm/s and kerb strikes of 250–300 mm/s. Compared with Monza, what does this mean?