Scenarios / GTP at Long Beach: locking the fronts over the T1 bumps

GTP at Long Beach: locking the fronts over the T1 bumps

Track
Long Beach street circuit
Session
IMSA GTP, FP2 (single practice before qualifying), 100-minute race format
Conditions
Dry, 23 °C air, 36 °C track, dusty street surface
Tyres
Michelin slicks
Driver“Down Shoreline into T1, and into the hairpin: the fronts lock as soon as we hit the bumps, it just skips. If I back off the brake pressure it's fine but I'm losing 3 car lengths. Rest of the lap it's actually not bad, the kerbs at T6 and T8 are OK.”
On the data screen
T1 braking zone (≈ 280 → 95 km/h)Value
Front wheel speed drop events (> 15% slip)3 per lap, all on bump impacts
Front damper velocity at bump impacts350–450 mm/s (high-speed bump), damper force ≈ 4.5 kN
Front tyre load (pushrod load + upright accel × unsprung mass)spike +60% on impact, then −40% within ~25 ms; little residual oscillation
Front ride height min.4 mm (plank touches at one bump)
Front hot pressure1.85 bar (window 1.75–1.85)
Brake balance (BBW target)56% front

No ABS on the car — lock prevention is the driver's foot and the chassis.

Decision 1 / 3

Which mechanism is causing the locking, and why does it cut braking capacity even though the average front load is unchanged?