Engine & Hybrid
Torque, power, drivability, throttle maps, BoP restrictions, hybrid deployment and fuel.
Starting at L1 · Foundation
Torque, power & tractive force: power-limited vs traction-limited
Engine torque becomes wheel force through the total gear ratio; power sets how much force is available at a given speed. Below a crossover speed the tyres, not the engine, limit acceleration.
Throttle maps, pedal maps & drivability
With drive-by-wire the pedal is a torque request, not a throttle cable. The pedal map shapes how predictable torque is at small openings — which decides how hard the driver can lean on the rear tyres on exit.
Engine vital signs & data monitoring
Before looking at performance, confirm the car is healthy: oil and fuel pressure, fluid temperatures, lambda, voltage, rpm. Good alarm channels and trend views catch failures a run before they happen.
Fuel consumption, fuel accounting & lift-and-coast
Know fuel per lap, laps per tank and the lap-time cost of fuel mass; measure fuel by mass with temperature correction; when you must save, lift-and-coast at the end of fast straights is usually the cheapest technique.
Starting at L2 · Practitioner
Traction control: slip targets, TC maps & cut strategies
TC keeps driven-wheel slip near the tyre’s peak by cutting torque when measured slip exceeds a target that depends on speed, gear, lateral g and throttle. How it cuts matters as much as when.
Balance of Performance: restrictors, boost, power & energy limits, weight
BoP equalises different cars with restrictors, boost tables, power caps, energy per stint and minimum weight. Each lever changes a different part of the performance envelope — and therefore which setup and strategy decisions are optimal.
Hybrid systems in LMH / LMDh: deployment, energy & brake-by-wire
In Hypercar the hybrid does not add peak power — total power is capped. It changes where energy comes from, which axle drives (LMH above a speed threshold) and how braking torque is split, which makes brake-by-wire a key engineering topic.
Practise: scenarios
- Paul Ricard: power oversteer out of the slow corners L2
- Daytona: on the limiter in the draft L4
- Nordschleife in mixed conditions: choosing TC and ABS maps L2
- Bathurst 12 Hour: one extra lap per stint L3
- LMP2 at Spa: hitting a fuel target with lift-and-coast L2
- Hypercar at Bahrain: the BoP stint energy limit L3
- Hypercar at Spa: the balance changes when the front axle switches on L4
- LMDh at Sebring: rear instability on entry from brake-by-wire blending L3