Scenarios / Hypercar at Spa: the balance changes when the front axle switches on

Hypercar at Spa: the balance changes when the front axle switches on

Track
Spa-Francorchamps
Session
WEC FP3, qualifying preparation
Conditions
Dry, 21 °C air, 33 °C track
Tyres
Michelin Medium, new
Driver“Stavelot: on entry it's neutral, then as I get back to throttle on the exit the front washes out — it suddenly pushes at the same point every lap. Pouhon is steady, a bit of push but no surprise. Slow corners are fine.”
On the data screen
Stavelot (apex → exit)Value
Speed at onset of push188–193 km/h (accelerating, lateral ≈ 2.0 g)
Front MGU torque0 below ~190 km/h, ramps to ~ +350 Nm at wheels within 0.3 s above it
Understeer angle (steer − kinematic)+0.6° before, +1.5° within 0.4 s after deployment start
Front tyre combined sliplongitudinal slip front rises from ~0 to ~2%
Aero balance (est., at 190 km/h)46.5% front

Pouhon is taken above the threshold all the way through, so the front axle is already driven there. The deployment threshold speed is defined by BoP/regulations and cannot be changed by the team. The deployment profile (ramp rate, torque split, how energy is spread above the threshold) is a team calibration within the power limit.

Decision 1 / 3

Explain the mechanism behind the sudden push on the exit of Stavelot.