Ferrari 499P (LMH)
Ferrari's Le Mans Hypercar (2023 on; won Le Mans 2023–2025). As an LMH, the whole car is Ferrari's own design. It has a 2,992 cc 120° twin-turbo V6 driving the rear wheels and a 200 kW front-axle MGU, so it is intermittently 4WD. The front motor may only deploy above a BoP-defined speed (190 km/h dry and wet in the 2025 WEC BoP tables), and total system power is capped by BoP (e.g. 501 kW below 250 km/h, Qatar 2025).
The rules are built around performance balancing: weight, power, power gain above 250 km/h, energy per stint (e.g. 897 MJ) and front-deployment speed are all BoP parameters, and aero is homologated within a performance window. Brake-by-wire blends front-MGU regeneration with friction braking, so the effective front/rear balance shifts with regen level and battery state. ABS is not permitted; TC is. The engineering work is mainly energy management, brake-by-wire/regen calibration, tyre management with no warmers, and the aero platform within the homologated window.
Specification
| Mass | BoP-set; e.g. 1,037 kg min. dry (WEC 2025 Qatar BoP); base regulation 1,030 kg |
| Power | Total ICE + MGU power at the wheels capped by BoP (~500 kW nominal; e.g. 501 kW below 250 km/h, Qatar 2025). When the 200 kW front MGU deploys, ICE torque is cut so the total stays within the cap |
| Engine | Ferrari F163CG 2,992 cc 120° V6 twin-turbo, stressed member |
| Gearbox | 7-speed sequential (Xtrac per public sources) |
| Differential | Rear limited-slip; front axle driven by the MGU (torque vectoring not permitted) |
| Tyres | Michelin (WEC spec), limited allocation; tyre warmers banned in WEC from 2024 |
| Aero | Homologated bodywork within the ACO aero performance window; limited adjustable aero (rear wing) |
| Brakes | Carbon discs and pads; Brembo brake-by-wire blends front-axle MGU regeneration (up to 200 kW) with friction braking |
| Electronics | TC permitted, ABS not permitted; hybrid management; FIA-sealed torque sensors for power/energy metering |
| Chassis | Carbon monocoque; double wishbone pushrod suspension |
| Hybrid | 200 kW front-axle MGU with battery; front deployment only above BoP speed (190 km/h in 2025) |
Regulations & BoP
- LMH (FIA/ACO): manufacturer-designed car; aero homologated within the ACO performance window; limited adjustable aero.
- BoP: minimum weight, max power below 250 km/h, power gain above 250 km/h, front-deployment speed (190 km/h in 2025), max stint energy and refuelling time. Applied per event (e.g. WEC decision D09, Qatar 2025).
- From 2026 the FIA/ACO no longer publish WEC BoP tables; they go only to the teams. The 2025 figures quoted here are for orientation. Rivals' power and energy have to be inferred from GPS speed traces and stint lengths.
- Hybrid: 200 kW front MGU; deployment only above the BoP speed.
- No ABS; traction control permitted.
- Tyres: Michelin, limited allocation; no tyre warmers in WEC from 2024.
Engineering focus
- Energy management: deployment, regen and lift-and-coast within the stint energy limit
- Brake-by-wire and regen blending calibration vs driver feel
- Tyre warm-up without warmers, and double-stint degradation
- Aero platform within the homologated window (heave, ride height, rake)
- BoP-aware strategy: stint length, refuelling time, drag level
What can be adjusted
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Anti-roll bars (front / rear) | Within homologated parts | ● Free | Mid-corner balance tool. Above the deployment speed the front axle is also driven, so front roll stiffness (inside-front unloading) affects front-MGU traction in fast corners. |
| Springs and heave elements | Within homologated parts | ● Free | Heave stiffness controls ride height under aero load and therefore aero balance at speed. Stiffer front heave = more stable high-speed balance but worse over bumps (Sebring, Spa Eau Rouge compression). |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Dampers | Within homologated parts; clicks free | ● Free | Platform and kerb compliance. LS for pitch and transients, HS for kerbs (Le Mans chicanes, Spa). |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Ride heights / rake | Within plank rules and homologated aero window | ◐ Limited | Main balance tool. Total downforce is capped by the aero window, so rake is used more to set balance and sensitivity than to chase load. |
| Camber | Within mechanical range and Michelin limits | ● Free | With no tyre warmers, camber affects warm-up as well as peak grip. Too much camber slows warm-up on the outer part of the tread. |
| Minimum weight (BoP) | BoP weight | ◆ BoP / homol. | Not a setup item. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Toe (front / rear) | — | ● Free | Rear toe-in for stability and power-down. Front toe adds warm-up heat on out-laps but costs drag on the Le Mans straights. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Rear wing / adjustable aero | Within the homologated range | ◐ Limited | Aero adjustment is restricted to the homologated range so that the car stays inside its Cz/Cx window. Used to trim balance per track. |
| Aero configuration (Le Mans vs standard) | Homologated within ACO window; BoP-dependent | ◆ BoP / homol. | Le Mans uses its own BoP and drag level, so balance work restarts there. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Brake-by-wire / regen blending | Calibration within regulations | ◐ Limited | Brake-by-wire mixes regeneration and friction. Its calibration affects pedal feel and stability. Driver complaints of rear instability or inconsistent pedal often come from the regen blend, not the mechanical bias. |
| Brake bias | Driver-adjustable | ● Free | Regen on the front axle changes the effective balance, so the bias shown on the dash is not the full picture. Look at total front/rear braking torque in the data. |
| Brake ducts | Homologated ducts; blanking allowed | ◐ Limited | Carbon brakes need temperature management, especially at night and on cold out-laps. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Traction control | Driver-adjustable TC | ● Free | TC is permitted (ABS is not). Below the deployment speed the car is RWD, so slow-corner exits behave like a RWD car. |
| Hybrid deployment / regen strategy | Front deployment only above BoP speed; total energy per stint limited | ◐ Limited | The main race tool: where to deploy, how much to regen, and lift-and-coast targets to meet the stint energy. Small savings per lap add up to an extra lap per stint. |
| Power (BoP) | BoP max power below 250 km/h and power gain above | ◆ BoP / homol. | Not a setup item. It affects top speed and how drag level is chosen. |
| Energy per stint (BoP) | e.g. 897 MJ (Qatar 2025) | ◆ BoP / homol. | Sets stint length and fuel-save needs. Track it lap by lap against target in the data. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Gear ratios | Homologated ratios | ◆ BoP / homol. | Not adjustable. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Rear differential | Within homologated parts | ◐ Limited | Entry stability vs rotation on the RWD part of the lap (below the deployment speed). |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Tyre pressures | Within Michelin limits | ● Free | No warmers: start pressures and out-lap procedure decide how quickly the tyres reach their window. Also consider pressure build over double stints. |
| Tyre allocation | Limited sets per event | ◆ BoP / homol. | Double- and triple-stinting is standard. The allocation forces strategy decisions in qualifying. |
Typical complaints & first tools
| Driver / car issue | Usual first fix |
|---|---|
| Rear instability under braking | Review brake-by-wire/regen blend calibration; then bias forward, rear toe-in |
| Slow tyre warm-up on out-laps | Raise start pressures, review camber/toe, coach out-lap procedure |
| High-speed understeer | Check front ride height at speed against the aero map. If above the stall region: soften front heave / remove front packer or stiffen rear heave to keep rake, lower front ride height slightly. Stiffen the front only if the floor stalls or grounds |
| Snap oversteer on slow exits (RWD below deployment speed) | TC up one step, soften rear ARB, adjust diff |
| Stint energy over target | Set lift-and-coast targets per corner, revise deployment/regen strategy |