Gearbox & Gearing
Ratio selection, gear charts, shift points, top speed vs acceleration, sequential gearboxes.
Starting at L1 · Foundation
Gear ratio fundamentals & tractive effort curves
The gearbox keeps the engine inside its power band across the speed range. Tractive-effort curves per gear, compared with the ideal constant-power hyperbola, show what each ratio costs and gains.
The gear chart & the total-gear-ratio math channel
Plot rpm against speed and every sample should fall on one line per gear. The total-gear-ratio math channel turns that into a stepped trace that reveals gear usage, wheelspin, lock-ups and poor down-shift blips.
Sequential gearboxes, paddle shift & what homologation leaves you
Racing sequential gearboxes use dog engagement, a selector barrel and electronic shift control (cut + blip). In GT3, F2 and similar categories ratios are homologated — but shift calibration, maintenance and monitoring remain the engineer’s job.
Time vs distance & the value of corner-exit speed
A constant time gap looks like a growing distance gap on a straight. Exit speed gains carry down the following straight but decay — by how much depends on whether the car is traction-, power- or drag-limited.
Starting at L2 · Practitioner
Choosing ratios: top gear, gaps & corner gears
Pick top gear for the longest straight in race conditions (tow!), space the intermediates for the speed bands the track actually uses, and choose corner gears so the exit sits in the rpm of best acceleration without a forced mid-exit shift.
Up-shift & down-shift analysis: shift points, shift time, blips, over-rev
Optimal upshift rpm maximises the power used between post-shift and shift rpm; shift time is read from the longitudinal-g dip; down-shifts need a correct blip and must be protected against over-rev.