Suspension Geometry & Kinematics
Motion ratio, roll centre, camber gain, bump steer, anti-dive/anti-squat, caster and scrub.
Starting at L1 · Foundation
Motion ratio & installation ratio
The spring, damper and anti-roll bar never sit at the wheel. The motion ratio converts what they do into what the tyre feels – and because it enters squared, small geometry errors become large rate errors.
Instant centre & roll centre
The front-view instant centre and the roll centre decide how much lateral load transfer goes through the links rather than the springs, how much the body rolls, and whether the car jacks up in corners.
Camber gain & camber compensation in roll
Body roll tilts the outside tyre towards positive camber; suspension geometry gains negative camber in bump to fight it. How much is recovered – and what it costs in heave – shapes static camber choice and tyre temperatures.
Bump steer & roll steer
Toe that changes with wheel travel steers the car without the driver. Measuring it with a bump-steer gauge and shimming the track-rod end is a core workshop skill; using roll steer deliberately is a balance tool.
Caster, kingpin inclination, scrub radius & mechanical trail
The steering axis geometry decides steering weight, self-centring, camber change with steer and the diagonal weight jacking that happens every time the driver turns the wheel.
Ride height & rake as geometry
Ride height is not just an aero number: it sets the operating point of every kinematic curve – roll centre, camber, bump steer, anti percentages. Static and dynamic ride height can differ by tens of millimetres.
Starting at L2 · Practitioner
Anti-dive, anti-squat & anti-lift
Side-view geometry can route part of the longitudinal load transfer through the links instead of the springs, controlling pitch. It never changes how much load is transferred – only the path, and therefore pitch, platform and feel.
Compliance steer & compliance camber
Real suspensions deflect under load. Compliance steer and camber under cornering forces can be as large as the kinematic effects engineers carefully set on the alignment pad.