Cars / Porsche 911 GT3 Cup (992.1) / 911 Cup (992.2, 2026+)
One-make Cup · Porsche Mobil 1 Supercup / Porsche Carrera Cups (Germany, France, North America, Asia, Australia…)

Porsche 911 GT3 Cup (992.1) / 911 Cup (992.2, 2026+)

The most widely raced one-make car in the world. A rear-engined, naturally aspirated 4.0 L flat-six on spec Michelin slicks, with a sequential dog gearbox. The 992.1 (2021–2025) has no ABS and no traction control. The 992.2 (from 2026, renamed simply "911 Cup") adds Bosch M5 racing ABS and TC (11 settings each), 520 PS and bigger brakes, so check which generation you are running.

Setup freedom is deliberately small: ARBs, ride heights, alignment, wing and pressures. Most of the lap time is driver, brake release and tyre management. The car's rear weight bias gives huge traction and braking but a light front. The engineering game is making the front work on entry and mid-corner without making the rear nervous.

Specification

Mass~1,260 kg (Porsche data, 992.1)
Power992.1: 375 kW (510 PS) @ 8,400 rpm, 470 Nm @ 6,150 rpm; 992.2 (2026+): 382 kW (520 PS)
Engine3,996 cc naturally aspirated flat-six, rear-mounted, max ~8,750 rpm (992.1)
GearboxPorsche 6-speed sequential dog-type, paddle shift with electronic actuator; sintered racing clutch
DifferentialMechanical limited-slip differential
TyresMichelin Pilot Sport slicks (series spec); 992.1: 30/65-18 front on 12J, 31/71-18 rear on 13J
AeroWide (Turbo) body, swan-neck rear wing adjustable in 11 positions; 992.2 revised front-end/underbody aero
Brakes6-piston front / 4-piston rear monobloc calipers, 380 mm steel discs (992.2: front disc thickness 32 → 35 mm); dual circuits with balance adjustment
ElectronicsBosch MS 6.6 ECU, Porsche logger and power box, TPMS. 992.1: no ABS/TC. 992.2: Bosch M5 ABS + TC, 11 settings each
ChassisAluminium-steel composite body, welded cage; wheelbase 2,459 mm

Regulations & BoP

  • One-make: Porsche Motorsport supplies the car. Technical regulations of each Cup define which settings may be changed (mainly ARB, ride height, alignment, wing, brake balance, pressures).
  • No BoP; minimum weight and in some championships driver weight compensation are defined by the series.
  • Tyres: Michelin spec slicks and wets; limited new sets per event. Michelin has supplied Supercup since 2002.
  • Sealed: engine, ECU, gearbox, dampers.
  • 992.1 vs 992.2: the 2026+ car adds Bosch M5 ABS and TC as standard. Always confirm which car your series runs.

Engineering focus

  • Making the front axle work: front ARB, front camber, rake and pressures to fight the rear-engine light front
  • Brake release and trail-braking analysis (no ABS on 992.1): lock-up detection in wheel-speed data
  • Precise tyre-pressure targeting on spec Michelins across changing track temperatures
  • Driver comparison: minimum speed, throttle pick-up point and brake pressure shape vs teammates
  • Rear stability on lift-off and fast changes of direction (rear toe, rear ARB)

What can be adjusted

ParameterRangeFreedomNotes
Front anti-roll barDouble-blade bar, several positions◐ LimitedFirst tool for mid-corner balance. With the rear-engine weight bias, the front is easily overloaded. Soften the front bar for more front grip in slow and medium corners.
Rear anti-roll barDouble-blade bar, several positions◐ LimitedStiffen to rotate the car mid-corner. Soften for traction and kerb compliance. Big rear changes make the car snappy on lift-off: move in single steps.
SpringsSpec springs○ FixedNo spring choice in Carrera Cup / Supercup. The platform is managed by ride height and ARBs.
ParameterRangeFreedomNotes
DampersSpec dampers with Porsche motorsport valving○ FixedNo damper development or clicks in most Cup championships. If the driver complains about kerb behaviour, the answers are ride height, ARB and line.
ParameterRangeFreedomNotes
Ride heights / rakeAdjustable above series minimum heights◐ LimitedMain platform and aero-balance tool. More rake (rear up) puts load on the front for turn-in but makes the rear lighter at high speed. Measure on the setup pad with ballast/driver weight and fuel defined by the series.
CamberWithin mechanical range and series/Michelin limits◐ LimitedFront camber is the main front-grip lever. Read inner/middle/outer temps after a consistent run. Rear camber trades traction against lateral grip.
Corner weights / cross-weightVia spring perches● FreeSet with driver ballast in the seat. A cross-weight error gives one-direction understeer that looks like an ARB problem.
ParameterRangeFreedomNotes
Toe (front / rear)—◐ LimitedRear toe-in calms the car on lift-off and in fast changes of direction. Front toe-out helps the light front respond on turn-in.
Power steeringElectro-hydraulic/electric spec system○ FixedNo adjustment beyond what the spec system allows.
ParameterRangeFreedomNotes
Rear wing angle11 positions◐ LimitedBalance high-speed stability against top speed. Low positions at Monza-type tracks, high at technical tracks. Each step moves aero balance rearward.
ParameterRangeFreedomNotes
Brake balance (bias bar)Balance bar adjustment● FreeCritical on the 992.1 without ABS: the driver modulates lock-up. Rear-engine weight transfer means the rear brakes do more work than on a front-engined car. Too much rear bias causes entry snap.
Pads / discsSpec parts○ FixedManage with cooling and driving style. Glazing appears on gentle drivers who never get heat in.
ABS level (992.2 only)11 settings (992.2); not fitted on 992.1◐ LimitedNew for 2026 drivers coming from the 992.1: treat ABS as a safety net and keep a setting low enough that braking performance is not lost.
ParameterRangeFreedomNotes
Traction control (992.2 only)11 settings (992.2); not fitted on 992.1◐ LimitedOn the 992.1 traction is handled by the rear ARB, throttle application and diff. On the 992.2, coach the driver to use TC as the tyre degrades.
Engine power / mapsSealed, spec○ FixedEqual power. No BoP.
ParameterRangeFreedomNotes
Gear ratiosSpec 6-speed○ FixedNot adjustable.
ParameterRangeFreedomNotes
DifferentialSpec mechanical LSD○ FixedSealed or spec in most Cup series. Exit/entry behaviour is tuned with ARB, toe and driver inputs.
ParameterRangeFreedomNotes
Tyre pressuresWithin Michelin recommendations / series minimums● FreeIn a spec series this is the most valuable lever. The rear-engined car loads the rears hard. Balance front/rear hot pressures to the target and account for the long right/left corner bias of the track.
Tyre allocationLimited number of new Michelin sets per event (series sporting rules)◆ BoP / homol.Decide early which new sets go to qualifying. Many Cups qualify and race on few sets: degradation matters.

Typical complaints & first tools

Driver / car issueUsual first fix
Entry and mid-corner understeerSoften front ARB / stiffen rear ARB, add front camber, review rake; coach later and lighter brake release to keep front load
Lift-off oversteer in fast cornersMore rear toe-in, soften rear ARB, add rear wing
Front lock-ups under braking (992.1)Move bias rearward slightly, coach brake release; check front pressures/temperatures
Poor traction out of slow cornersSoften rear ARB, review rear camber; on 992.2 increase TC one step
Car good for 3 laps then overheats rearsLower rear start pressures, reduce rear ARB, coach smoother throttle application