Cars / Porsche 718 Cayman GT4 RS Clubsport
GT4 · GT4 European Series, GT4 America, IMSA Michelin Pilot Challenge (GS), national GT4 championships
Porsche 718 Cayman GT4 RS Clubsport
Porsche's GT4 since 2022. It is a mid-engined Cayman with the 4.0 L naturally aspirated flat-six (500 PS before BoP), a 7-speed PDK and McPherson struts on both axles. As a near-series GT4 car its setup window is narrow and homologated: 3 spring rates per axle, adjustable sword-type ARBs, 2-way dampers, alignment, ride height, rear-wing angle and pressures. ABS, ESC and TC come from a racing-optimised PSM with a map switch.
GT4 is BoP'd heavily (restrictor apertures/power mapping and weight). The engineer works on platform, McPherson-specific alignment, pressures and drivability for mostly Silver/Bronze drivers. In 2-driver sprint races, pit-stop execution and driver-change time often decide the result.
Specification
| Mass | 1,330 kg homologated unladen (Porsche data); race weight set by BoP |
| Power | ~368 kW (500 PS) before BoP; BoP mapping with restrictor apertures |
| Engine | 3,996 cc naturally aspirated flat-six, mid-mounted, rigidly mounted |
| Gearbox | 7-speed PDK (dual-clutch), shorter ratios than the earlier GT4 Clubsport |
| Differential | Mechanical differential lock, optimised for racing |
| Tyres | Series spec; 9J×18 front, 10.35J×18 rear |
| Aero | Fixed swan-neck rear wing with larger adjustment range, gurney, flics, air curtains, arch vents |
| Brakes | 380 mm multi-piece steel discs, racing pads; dual circuits with balance-beam bias adjustment |
| Electronics | Racing PSM with map switch for ABS, ESC and TC; Cosworth ICD dash with logger; TPMS |
| Chassis | Aluminium-steel body, McPherson struts front and rear; wheelbase 2,476 mm; 115 L FT3 tank |
Regulations & BoP
- SRO GT4 homologated: near-production car; the homologation form lists every part and adjustment.
- BoP: restrictor apertures/power mapping and weight, set per series.
- Tyres: series spec, allocation-limited.
- Porsche explicitly states that the customer is responsible for compliance with SRO GT4 technical regulations and the homologation document.
Engineering focus
- McPherson-specific alignment: static camber, camber loss in roll, tyre temperature spreads
- Tyre-pressure targeting where aero is modest
- Drivability for Silver/Bronze drivers: ABS/TC map and brake balance choices
- Pit-stop and driver-change execution in sprint formats
- Brake temperature and pad wear on steel brakes
What can be adjusted
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Front anti-roll bar (sword) | Several sword positions on homologated bar | ◐ Limited | Primary mid-corner balance tool. On a McPherson car roll costs camber on the outside wheel, so the front bar changes both LLTD and front camber in roll. Re-check front tyre temperatures after any front ARB change. |
| Rear anti-roll bar (sword) | Several sword positions on homologated bar | ◐ Limited | Rotation vs traction. The mid-engined layout is well balanced, so single-step changes are normally enough. |
| Springs | 3 spring rates front, 3 rear (Porsche) | ◐ Limited | Event-level platform choice: stiffer for smooth, fast tracks; softer for bumpy or kerb-heavy tracks and the wet. Strut cars recover little camber in roll, so softer springs (more roll) mean the outside tyre runs more positive camber. Compensate with static camber or roll stiffness. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Dampers (2-way) | Bump and rebound clicks on homologated dampers | ◐ Limited | Small range: use for transient feel (turn-in response, kerb compliance), not for big balance changes. Front rebound for entry stability, rear bump for exit squat. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Ride height / rake | Adjustable; series/BoP minimums apply | ◐ Limited | GT4 aero is modest, but rake still moves balance. Lower ride height also changes McPherson geometry (roll centre height drops quickly), so very low settings can make the car roll more and feel lazy. |
| Camber | Adjustable at strut top within homologated range | ◐ Limited | McPherson struts gain little camber in roll, so static negative camber has to be larger than on a double-wishbone car to keep the loaded tyre flat. Typical sign of too little camber: hot outer shoulder. |
| Ballast | BoP weight | ◆ BoP / homol. | Set by BoP. Place it as low and as central as the regs allow. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Toe (front / rear) | — | ● Free | Rear toe-in for lift-off and high-speed stability. Front toe-out for turn-in. Strut cars have notable bump-steer, so check toe at race ride height. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Rear wing angle | Homologated range (extended on RS) | ◐ Limited | Aero balance and high-speed stability. Effect per step is smaller than on GT3, but at fast tracks it is still a key lever. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Brake balance (balance beam) | Mechanical balance bar | ● Free | Sets the pressure split. Works together with the PSM ABS map: a forward bias with a high ABS level is a forgiving Bronze setting; more rear bias adds entry rotation but costs stability. |
| ABS / ESC map | Map switch positions (racing PSM) | ◐ Limited | More intervention for Bronze drivers and the wet. ESC normally off or minimal in dry racing. |
| Brake cooling / pads | Homologated parts | ◐ Limited | Steel brakes on a 1.3 t car: watch disc temperature and pad wear at heavy-braking tracks. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Traction control | Map switch positions (racing PSM) | ◐ Limited | Used heavily in the wet. In the dry, run the lowest level that still gives repeatable exits, because excessive TC cuts drive. |
| Power (BoP restrictor / map) | Set by BoP | ◆ BoP / homol. | Not a setup item. Affects gearing and fuel use. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Gear ratios | 7-speed PDK, homologated ratios | ○ Fixed | Not adjustable. Seamless PDK shifts mean the focus is on shift points and downshift timing. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Differential | Homologated mechanical lock | ○ Fixed | Not a setup item. Tune exit with rear ARB, TC and rear toe. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Tyre pressures | Within supplier window / series minimums | ● Free | With modest aero, pressures matter more relative to other tools. Target hot pressure per axle and check spread after each run. |
| Tyre allocation | Series spec, limited sets | ◆ BoP / homol. | Plan sets across sprint races and qualifying sessions. |
Typical complaints & first tools
| Driver / car issue | Usual first fix |
|---|---|
| Understeer mid-corner | Soften front ARB one position, add front camber, check front hot pressures |
| Front outer shoulder overheating | More negative front camber (strut camber loss in roll); check pressures and front ARB |
| Snappy on lift-off in fast corners | More rear toe-in, soften rear ARB, one step more rear wing |
| Poor traction in the wet | TC map up, soften rear ARB/springs, raise ride height slightly |
| Brake fade late in stint | Open cooling, check pad wear, coach earlier/lighter initial braking |