Cars / Mercedes-AMG GT3 Evo
GT3 · GT World Challenge (Pirelli), IMSA GTD/GTD Pro (Michelin), FIA WEC LMGT3 (Goodyear), DTM, Nürburgring, national GT3

Mercedes-AMG GT3 Evo

The Mercedes-AMG GT3 Evo (from 2020) is the most widely sold current GT3 platform. It has a front-mid-mounted 6.2 L naturally aspirated V8 (~550 PS / 650 Nm before BoP) with a rear-mounted 6-speed sequential transaxle. It is known for very good stability, braking and high-speed performance, a long wheelbase and a heavy front end. Like the BMW, it can understeer in slow corners.

Electronics include Bosch M5 ABS with 12 intervention stages and AMG traction control. The dampers are adjustable for bump and rebound and the ARBs are configurable. The NA V8's linear torque makes it relatively easy for Bronze drivers.

Specification

Mass~1,285 kg or less (AMG data); race minimum set by BoP
Power~550 PS @ 7,300 rpm, ~650 Nm @ 4,800 rpm before BoP; output set by BoP (restrictor)
EngineAMG M159 6,208 cc naturally aspirated V8, front-mid mounted, dry sump
Gearbox6-speed sequential racing transaxle (Hewland-built per public sources), pneumatic paddle shift
DifferentialMechanical limited-slip differential
TyresSeries spec; 18-inch forged wheels
AeroLarge rear wing, splitter and diffuser; Evo revised aero for reduced pitch sensitivity
BrakesSteel discs, racing calipers; Bosch M5 ABS with 12 stages
ElectronicsBosch ECU, Bosch M5 ABS (12 stages), AMG TRACTION CONTROL, automatic data logging, auto engine start on air-jack drop
ChassisAluminium spaceframe with steel cage; double wishbones; 120 L tank; 4,746 mm long

Regulations & BoP

  • Homologated GT3 (Evo kit homologated for 2020).
  • BoP: weight, restrictor/power, and series-specific fuel/energy, ride-height or wing constraints.
  • Tyres: one supplier per series, allocation-limited.
  • Driver categories by FIA rating; car widely used in Pro-Am/Am because of its forgiving behaviour.

Engineering focus

  • Slow-corner rotation: front ARB, diff preload, rear ARB, rake
  • Using braking stability: ABS stage and bias to suit the driver
  • Front aero platform: front ride height sensitivity, packers
  • Tyre-pressure targeting and long-stint degradation
  • BoP-aware strategy: fuel per lap with a thirsty NA V8

What can be adjusted

ParameterRangeFreedomNotes
Front anti-roll barConfigurable positions on homologated bars◐ LimitedHeavy front end: soften front bar for slow-corner front grip. Stiffen for high-speed directional response.
Rear anti-roll barConfigurable positions on homologated bars◐ LimitedStiffen rear to rotate in slow corners. The NA V8 is gentle on traction, so there is margin to stiffen the rear before exit suffers.
Springs (front / rear)From AMG Customer Racing range◐ LimitedPlatform choice. The car is sensitive to front ride height for aero balance.
Bump stops / packersPacker thickness and bump-rubber type within supplier range● FreeOn high-downforce GT3s the bump rubber is effectively the aero platform spring at high speed. Adding packer lowers the speed or load at which the stop engages, so the axle gets stiffer at high speed and under heavy braking. More front packer holds the front up: less front downforce (aero balance moves rearward) and more front roll stiffness, so usually more high-speed understeer. To cure high-speed understeer, remove front packer or add rear packer to hold rake. Add front packer only when ride-height and aero-map data show the splitter/floor stalling or the skid touching.
ParameterRangeFreedomNotes
Dampers (bump / rebound)Adjustable compression and rebound● FreeUse front rebound for entry stability and rear bump for exit. The heavy front benefits from controlled front LS bump on turn-in.
ParameterRangeFreedomNotes
Ride heights (front / rear) and rakeFree within homologated travel; some series/BoP set minimum heights◐ LimitedThe main aero balance tool on a GT3: +1 mm rear ride height (or -1 mm front) moves aero balance forward roughly 0.3–0.5 %. Check BoP/series minimum heights and plank/skid rules before chasing rake. Always re-check heights hot, with fuel load, as measured on the setup plate.
Camber (front / rear)Typically −3.5 to −4.5° front, −2.5 to −3.5° rear● FreeSet on tyre-temperature spread (aim ~8–12 °C inner-to-outer on hot pit temps) and on tyre-supplier camber limits where they exist. Front camber is a peak-lateral tool; too much costs braking stability and inner-shoulder wear.
Ballast / minimum weightBoP weight, plus success ballast in some series◆ BoP / homol.Ballast position (where the series allows) can be used to help weight distribution, but the amount is set by BoP.
ParameterRangeFreedomNotes
Toe (front / rear)Front ~0 to 2 mm total out; rear ~2–4 mm total in● FreeRear toe-in is a stability tool (more = more stable entry and power-down, but more drag and rear temperature). Front toe-out sharpens initial turn-in. Change in 0.5 mm steps — GT3s are very sensitive to rear toe.
ParameterRangeFreedomNotes
Rear wing angleHomologated range; BoP may cap◐ LimitedEach step typically shifts aero balance ~1 % rearward and costs some top speed. BoP may cap the usable range. Balance wing against rake: wing for high-speed stability, rake/ride height for overall platform.
ParameterRangeFreedomNotes
Brake biasDriver-adjustable balance bar (cockpit knob), typically ~54–60 % front● FreeMove rearward for rotation on entry, forward for stability and to protect the rear under ABS. On ABS cars the bias also changes which axle ABS intervenes on first — check ABS activity per axle in the data, not just lock-ups.
Master cylinder sizesFrom the homologated/manufacturer list◐ LimitedChanges pedal-force-to-pressure gain and the bias range available. Used to suit driver pedal feel (gentlemen drivers often want lower effort) rather than as a balance tool.
Brake ducts / blankingHomologated ducts; blanking/tape allowed◐ LimitedTarget disc and pad windows from the brake supplier. Over-cooling at cold tracks kills initial bite; under-cooling at Monza/Bahrain-type tracks causes fade and pad glazing.
Pad compoundManufacturer-approved compounds; series may restrict◐ LimitedEndurance pads trade initial bite for wear and temperature stability. Change pads with care: driver pedal reference and ABS calibration both move.
ABS levelBosch M5 ABS, 12 stages● FreeHigher intervention = more stable but longer stops; lower = more aggressive. Wet races and worn tyres usually want more. Gentlemen drivers often benefit from a higher setting than pros.
ParameterRangeFreedomNotes
Power / torque (restrictor, boost, power map)Set by BoP each event◆ BoP / homol.Not a setup tool. The engineer manages around it: gearing, fuel per lap and drag level. Some series use torque sensors to police power curves.
Engine / fuel mapsHomologated maps only (e.g. race, fuel-save, safety car)◐ LimitedFuel-save maps and lift-and-coast targets are strategy tools. The torque curve itself is homologated.
Traction controlAMG traction control, multi-stage● FreeTC level is a real handling tool on exit: more TC hides poor traction, but heats the rears less. Set a baseline, then let the driver step through it as the tyres degrade. In data, compare wheel-speed slip with TC cut.
ParameterRangeFreedomNotes
Gear ratios / final driveHomologated set; usually one ratio set per car◆ BoP / homol.Effectively fixed. Gearing problems are solved through shift points and driving lines, not new ratios.
ParameterRangeFreedomNotes
Tyre pressuresHot targets from the tyre supplier; some series enforce minimum pressures● FreeGT3 tyres want a narrow hot window (often ~1.8–2.0 bar hot, supplier-dependent). Start pressures are chosen to hit target hot pressure by lap 2–3. Pressure is a balance tool only in small steps (~0.05 bar).
Tyre compound / allocationSingle spec per series (Pirelli in GTWC, Michelin in IMSA, Goodyear in WEC LMGT3); limited sets per event◆ BoP / homol.Plan the allocation: which sets for qualifying, which used sets for race stints and driver changes.
ParameterRangeFreedomNotes
Differential preloadWithin homologated components◐ LimitedReduce for slow-corner rotation. Increase for entry stability on fast tracks.

Typical complaints & first tools

Driver / car issueUsual first fix
Understeer in hairpinsSoften front ARB, reduce diff preload, more front camber
Lazy turn-inSmall front toe-out increase, more front LS bump damping, rake +1 mm
Rear loose in fast direction changesRear toe-in, soften rear ARB, add wing
Front tyre graining in cool conditionsRaise front pressures toward target, reduce front camber, review front ARB
Long braking distances with Am driverLower ABS stage one step, move bias forward, coach initial brake pressure