Ligier JS P325 (LMP3)
Ligier's third-generation LMP3 (from 2025). It runs the spec Toyota V35A 3.4 L twin-turbo V6 (~470 hp) that replaced the Nissan V8, with an Xtrac 6-speed sequential gearbox. The chassis is a carbon tub with 4-way Öhlins TTX40 dampers, third elements front and rear and an adjustable ARB system. It has real prototype downforce, no ABS, and traction control is available. Minimum weight is 1,000 kg.
LMP3 is the ACO's entry prototype class: cost-capped, with spec engine, gearbox and Michelin tyres and homologated aero. For an engineer it is the first car where heave/third-element platform control, ride-height-sensitive underfloor aero and brake management without ABS all matter at the same time. Many drivers step up from GT4/GT3, so driver development (trail-braking without ABS, trusting downforce) is part of the job.
Specification
| Mass | 1,000 kg minimum (ACO Gen3 LMP3) |
| Power | ~470 hp (350 kW); spec engine |
| Engine | Toyota V35A-FTS 3,445 cc V6 twin-turbo, racing version developed by ORECA with IHI turbos |
| Gearbox | Xtrac P1152 6-speed sequential |
| Differential | Limited-slip (spec drivetrain) |
| Tyres | Michelin (spec); 18-inch wheels, 13-inch wide |
| Aero | Homologated LMP3 bodywork; adjustable rear wing |
| Brakes | Brembo 6-piston calipers front and rear, ~355–360 mm discs; no ABS |
| Electronics | Spec engine ECU with TC; data logging; power steering |
| Chassis | HP Composites carbon monocoque with Zylon side panels; double wishbone pushrod; wheelbase 2,860 mm; 100 L tank |
Regulations & BoP
- ACO LMP3 Gen3 (2025+): homologated chassis (Ligier, Duqueine, Ginetta, ADESS), spec Toyota V35A engine (homologated to end of 2029), spec gearbox and tyres.
- Cost cap: complete car ~299,000 EUR; powertrain ~89,200 EUR (ELMS announcement).
- No ABS; traction control available.
- Tyres: Michelin, allocation-limited.
- The series can balance different chassis (weight/aero); there is no team-level engine adjustment.
Engineering focus
- Platform control with third elements, packers and 4-way dampers
- Brake management without ABS: bias, cooling and driver brake-release coaching
- Aero balance via front ride height, rake and wing
- Tyre pressure targeting on spec Michelins in short sessions
- Driver development: stepping up from GT to prototype downforce
What can be adjusted
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Front anti-roll bar | Adjustable ARB system (homologated parts) | ◐ Limited | Mid-corner balance tool. On a prototype, roll also changes floor height at the edges, so ARB changes slightly affect aero too. 1 step stiffer front ≈ +1–2 % front LLTD → more mid-corner understeer. |
| Rear anti-roll bar | Adjustable ARB system (homologated parts) | ◐ Limited | Rotation vs traction with turbo torque. Stiffen in single steps. Soften for slow-corner exits and the wet. |
| Corner springs | From Ligier range | ◐ Limited | Mainly roll and kerb compliance, because the third elements carry much of the heave load. Softer corners help mechanical grip at bumpy tracks. |
| Third elements (front / rear) | Third spring rates and packers from Ligier range | ◐ Limited | Controls ride height under aero load and braking without adding roll stiffness. A stiffer front third (or more packer) holds front ride height in heavy braking and at high speed, which keeps aero balance stable. The price: the front runs higher at speed, so front load drops and balance moves rearward unless the floor was stalling. Too stiff makes the car skate over bumps. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Dampers (Öhlins TTX40, 4-way) | LS/HS bump and rebound clicks | ● Free | Through-rod 4-way dampers. LS bump/rebound control platform and transients (pitch on braking, turn-in). HS settings for kerbs and bumps (Sebring/Portimão vs Paul Ricard). Change 2 clicks at a time and check on damper-velocity histograms. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Ride heights / rake | Adjustable within plank/skid rules | ◐ Limited | Main aero balance tool. The underfloor is sensitive to front ride height: 1 mm at the front moves balance noticeably more than 1 mm at the rear. Check plank wear after each run. |
| Camber | Within mechanical range and Michelin guidance | ● Free | Tune on tyre temperature spread after a consistent run. More front camber for lateral grip, less for braking stability (important without ABS). |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Toe (front / rear) | — | ● Free | Rear toe-in for high-speed stability and power-down. Front toe-out for turn-in. Toe also costs top speed, so reduce it for Le Mans-type tracks. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Rear wing angle | Homologated range | ◐ Limited | Balance tool for high-speed corners. Run low wing at Le Mans (Road to Le Mans) and more at twisty circuits. Keep the balance with rake. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Brake bias | Cockpit balance bar | ● Free | No ABS, so this is critical for lock-ups. As speed falls in the stop, downforce and grip fall, so the driver must release pressure (trail release); bias alone cannot fix that. Over a stint, adjust bias to the lock-up pattern seen in the data (tyre wear, fuel load, low-grip surfaces) rather than following a fixed rule. |
| Brake ducts | Homologated ducts; blanking allowed | ◐ Limited | Keep discs and pads in their temperature window. Over-cooled brakes lock more easily because pad bite is inconsistent. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Traction control | TC positions on spec ECU | ● Free | Set for consistent exits. Increase in the wet and as rear tyres degrade. Compare wheel-speed slip with TC cut in the data. |
| Engine power | Spec, sealed | ○ Fixed | Equal power across chassis brands. Any balancing between chassis is done by the series, not the team. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Gear ratios | Spec ratios | ○ Fixed | Not adjustable. Optimise shift points and corner lines instead. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Differential preload | Within spec drivetrain parts | ◐ Limited | More preload = more entry stability and power-on understeer. Less = more rotation but snappier exits. Change between events rather than sessions. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Tyre pressures | Within Michelin window | ● Free | Key lever in a spec class. Hit hot targets per axle. In Le Mans Cup sessions are short, so warm-up speed matters as much as peak grip. |
| Tyre allocation | Limited sets per event | ◆ BoP / homol. | Plan new vs used sets for qualifying and race, including Bronze driver stints. |
Typical complaints & first tools
| Driver / car issue | Usual first fix |
|---|---|
| Front lock-ups into slow corners | Bias rearward a step, coach brake release as downforce falls, check front pressures/brake temperatures |
| High-speed understeer | Check front ride height at speed against the aero map. If above the stall region: soften the front third / remove front packer or stiffen the rear third to keep rake, lower front ride height slightly. Stiffen the front only if the floor stalls or the skid touches |
| Snap oversteer on exit | TC up one step, soften rear ARB, reduce diff preload change only if entry is fine |
| Bottoming / porpoising on straights | Raise ride height, stiffer thirds, check plank wear |
| Rear unstable in fast direction changes | More rear wing, rear toe-in, check rear third not too soft |