Lamborghini Huracán Super Trofeo EVO2
Lamborghini's one-make car (EVO2 from 2022). It has a naturally aspirated 5.2 L V10 with 620 CV, a sequential gearbox, steel brakes and a full carbon aero kit. Unlike the Porsche Cup car, it has racing ABS (12 positions) and TC (9 positions) plus 2-way Öhlins dampers. That gives the engineer more tools than in other Cup cars, although parts and settings are still restricted by the Super Trofeo rules.
The car is heavy-ish (~1,270 kg) with a high-revving V10 and a long-ish wheelbase (2,620 mm). It rewards a stable aero platform and good brake management. Pro-Am / Am line-ups mean the same car often has to suit two very different drivers.
The Huracán Super Trofeo EVO2 raced its final season in 2026; from 2027 Super Trofeo uses the twin-turbo V8 Temerario Super Trofeo, so check which car your series runs.
Specification
| Mass | ~1,270 kg (Lamborghini Squadra Corse data) |
| Power | 620 CV @ 8,250 rpm; 570 Nm @ 6,500 rpm |
| Engine | 5,204 cc naturally aspirated 90° V10, longitudinal, mid-mounted |
| Gearbox | 6-speed sequential (Lamborghini quotes Xtrac; some team spec sheets list Hor Technologie) |
| Differential | Mechanical limited-slip differential |
| Tyres | Pirelli slicks; 305/645-18 front on 11J, 315/680-18 rear on 12J |
| Aero | Complete carbon aero kit with quick-release fasteners; adjustable rear wing |
| Brakes | Steel discs (front 380×35 mm); racing ABS |
| Electronics | MoTeC M182 ECU; racing ABS with 12 positions; TC with 9 positions; multifunction steering wheel |
| Chassis | Hybrid aluminium/carbon chassis, double wishbones with rigid bushes; wheelbase 2,620 mm; 118 L tank |
Regulations & BoP
- One-make: car supplied by Lamborghini Squadra Corse. The Super Trofeo technical regulations list the allowed settings and parts.
- No BoP between cars. Driver categories (Pro, Pro-Am, Am, Lamborghini Cup) are classified separately.
- Tyres: spec Pirelli, limited allocation.
- Sealed: engine, ECU calibrations, gearbox internals.
- Exact setup freedoms vary by regional series and season: check current regulations.
Engineering focus
- Using the extra tools (2-way dampers, 12-step ABS, 9-step TC) to suit two drivers of very different levels
- Aero platform consistency: rake and wing against the coarse 2-position rear ARB
- Brake temperature and steel-disc fade management on heavy-braking tracks
- Tyre pressure targeting across stints of different pace
- Driver coaching vs the pro benchmark in the same car
What can be adjusted
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Front anti-roll bar | 6 positions | ◐ Limited | Main mid-corner balance tool. One position typically gives a clear but small change. Stiffen for high-speed stability, soften for slow-corner front grip. |
| Rear anti-roll bar | 2 positions | ◐ Limited | Coarse adjustment, so it is a track-type choice (soft for bumpy/slow tracks, stiff for fast/smooth) rather than a fine-tuning tool. Fine-tune with the front bar. |
| Springs | From the Lamborghini Squadra Corse list (series regulations) | ◐ Limited | Platform choice per event. Stiffer front helps aero platform under braking, softer helps kerbs. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Dampers (Öhlins TTX36, 2-way) | Bump and rebound clicks; front in-line, rear piggy-back | ◐ Limited | Rebound controls how quickly load comes off the axle (entry/exit transients). Bump affects platform and kerb response. Start from the Squadra Corse baseline and change 2 clicks at a time. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Ride heights / rake | Above series minimum heights | ◐ Limited | Primary aero-balance tool along with the wing. Rake shifts balance forward but can make the rear floaty in fast corners. |
| Camber | Within mechanical and series limits | ◐ Limited | Tune on tyre temperature spread. The V10's weight sits well back, so rear camber is a big traction lever. |
| Corner weights | Spring perches | ● Free | Set with the driver aboard. In Pro-Am pairings consider the heavier driver. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Toe (front / rear) | — | ● Free | Rear toe-in for stability. Front toe for turn-in response, which drivers often find lacking with a stiff front bar. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Rear wing angle | Multiple homologated positions | ◐ Limited | Balances high-speed stability and drag. Combine with rake to keep a consistent aero balance between fast and slow tracks. |
| Front splitter / dive planes | Spec bodywork | ○ Fixed | Not adjustable. Front aero load is tuned only with ride height/rake. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Brake bias | Cockpit-adjustable balance | ● Free | Use with ABS position: a slightly forward bias with a higher ABS step is the forgiving gentleman setting. Pros often run more rear bias and a lower ABS step for entry rotation. |
| ABS level | 12 positions | ● Free | More intervention = more stability, longer stops. Adjust for wet, worn tyres and driver ability. |
| Pads / discs | Spec steel discs and pads | ○ Fixed | Manage temperatures with cooling and driving. Steel discs fade if cooling is under-specified for the track. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Traction control | 9 positions | ● Free | The V10 is linear and progressive, so TC is mainly for worn rears and wet. Watch rear tyre temperature vs TC level. |
| Engine power / maps | Spec, sealed | ○ Fixed | No BoP between cars. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Gear ratios | Spec 6-speed | ○ Fixed | Not adjustable. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Differential | Spec mechanical LSD | ○ Fixed | Not a setup item in Super Trofeo. Tune exit with rear ARB, TC and dampers. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Tyre pressures | Within Pirelli recommendations | ● Free | Key lever. Hot-pressure targeting across Pro-Am driver stints with different pace is a real challenge. |
| Tyre allocation | Limited Pirelli sets per event | ◆ BoP / homol. | Plan sets across two races and qualifying per weekend. |
Typical complaints & first tools
| Driver / car issue | Usual first fix |
|---|---|
| Understeer mid-corner in slow sections | Soften front ARB (6-position bar), add front camber, check front hot pressures |
| Rear unstable on entry | Bias forward, raise ABS level one step, more rear toe-in |
| Car bottoms/porpoises in fast compressions | Raise ride height a little or add bump clicks; check bump-rubber engagement |
| Wheelspin on exit as tyres wear | Increase TC by 1–2 steps, soften rear damper rebound/bump on exit transient, review rear pressures |
| Brake fade late in race | Open brake ducts, coach earlier/lighter braking for the Am driver, check pad wear |