Cars / Hyundai Elantra N TCR
TCR · TCR World Tour / TCR Europe / national TCR series / IMSA Michelin Pilot Challenge (TCR)
Hyundai Elantra N TCR
Hyundai Motorsport's TCR car (from 2021). It is front-wheel drive with a 2.0 L turbo four (350 hp before BoP), a 6-speed sequential gearbox and a mechanical diff with an external preload adjuster. TCR is designed for cost control: engine and gearbox are homologated, there is no ABS, and setup is mostly about making a FWD car rotate (rear ARB, rear toe, rear camber, rear rebound) and getting the power down through the front tyres (diff preload, front camber, pressures).
The 1,265 kg minimum (with driver) is set by TCR rules. BoP (ballast and power) balances the different manufacturers.
Specification
| Mass | 1,265 kg minimum including driver (TCR regulations); BoP ballast on top |
| Power | 350 hp @ 7,000 rpm; 450 Nm @ 3,500 rpm (Hyundai data, before BoP) |
| Engine | Hyundai Motorsport 2.0 L direct-injection turbocharged inline-4 |
| Gearbox | 6-speed sequential with pneumatic paddle shift; cerametallic twin-disc clutch |
| Differential | Mechanical LSD with external preload adjuster |
| Tyres | Series spec (single supplier per series); 10×18-inch wheels |
| Aero | Homologated TCR body kit, splitter and rear wing |
| Brakes | Front 380 mm ventilated discs with 6-piston calipers; rear 278 mm discs with 2-piston calipers; hydraulic handbrake |
| Electronics | Hyundai ECU and power management; configurable dash/logger; no ABS |
| Chassis | Steel body with high-tensile cage; MacPherson front, four-arm multilink rear; wheelbase 2,750 mm; 100 L tank |
Regulations & BoP
- TCR concept (WSC Group): production-based FWD touring cars with homologated engine, gearbox and body kit.
- BoP: ballast and power adjustments, set per series.
- Tyres: single supplier per series, allocation-limited.
- Minimum weight mandated by TCR rules (1,265 kg including driver).
Engineering focus
- Rotation of a FWD car: rear ARB, rear toe, rear rebound, rake
- Front tyre management: pressures, camber and diff preload for traction vs wear
- Braking stability without ABS on a light rear axle
- Torque steer and exit traction
- BoP-aware race planning (ballast, power)
What can be adjusted
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Front anti-roll bar | Homologated positions | ◐ Limited | On a FWD car a stiff front bar unloads the inside front, which hurts traction on exit. Softening the front helps exit traction and mid-corner grip, at the cost of response. |
| Rear anti-roll bar | Homologated positions | ◐ Limited | Main rotation tool. TCR cars often run very stiff rear bars, sometimes lifting the inside rear, so the car rotates on entry and mid-corner. |
| Springs | From Hyundai Motorsport range | ◐ Limited | Stiff rear springs increase rotation. Front springs set the platform under braking and kerb behaviour. Front grip is everything, so avoid over-stiffening the front. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Dampers | Adjustable homologated dampers (click range per supplier) | ◐ Limited | Rear rebound is a strong entry-rotation tool on FWD: as the rear extends under braking, stiffer rebound transiently reduces rear tyre load, so the rear goes light faster on turn-in. Soften it if the rear steps out or locks. Front bump controls kerb-riding and platform under braking. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Ride height / rake | Adjustable; series/BoP minimums apply | ◐ Limited | More rake (rear up) helps rotation on entry and puts load on the front. Watch the MacPherson geometry change when the front is set very low. |
| Camber (front / rear) | Within homologated range | ◐ Limited | Front camber: the front tyres drive, brake and corner, so it is a compromise between braking/traction (less camber) and lateral grip (more camber). Less rear camber = less rear grip = more rotation. |
| BoP ballast | BoP weight | ◆ BoP / homol. | Set by BoP. Position as allowed; ballast toward the rear can help the balance of a nose-heavy car. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Toe (front / rear) | — | ● Free | Rear toe-out increases rotation but makes the car nervous at high speed. Many FWD setups run near-zero or slight rear toe-out. Front toe-out sharpens turn-in but heats the front tyres. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Rear wing angle | Homologated range | ◐ Limited | Modest aero. The wing is mainly for high-speed stability (FWD race cars can be loose at high speed after a rotation-biased mechanical setup). |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Brake bias | Balance bar | ● Free | Rearward bias helps rotation on entry, but with no ABS and a light rear it can lock the rears quickly. The driver adjusts as fuel burns and tyres wear. |
| Brake cooling / pads | Homologated parts | ◐ Limited | Front brakes do most of the work on a nose-heavy FWD car. Watch front disc temperature at heavy-braking tracks. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Power (BoP) | BoP power % | ◆ BoP / homol. | Not a setup item. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Gear ratios | Homologated set | ◆ BoP / homol. | Not adjustable. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Differential preload (external adjuster) | External preload adjustment | ◐ Limited | Most important FWD-specific tool. More preload = better traction (less inside-front spin) but more power understeer, torque steer and front wear. Less preload = better rotation, more inside wheelspin. Adjustable without stripping the gearbox, so it can be tuned between sessions. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Tyre pressures | Within supplier window | ● Free | The front tyres do almost everything and build pressure fastest. Set front start pressures lower than rear to arrive at target together. |
| Tyre allocation | Series spec, limited sets | ◆ BoP / homol. | Front tyre wear is usually the race limit: plan sets and pressures for the race distance. |
Typical complaints & first tools
| Driver / car issue | Usual first fix |
|---|---|
| Mid-corner understeer | Stiffen rear ARB, slight rear toe-out, reduce rear camber |
| Inside-front wheelspin on exit | Increase diff preload, soften front ARB |
| Rear lock-up and snap under braking | Bias forward, soften rear rebound, reduce rear toe-out |
| Front tyre wear over a race | Reduce front camber slightly, lower diff preload, re-target front pressures |
| Torque steer on exit | Reduce diff preload, check front toe and caster settings |