Cars / Ferrari 296 GT3
GT3 · GT World Challenge (Pirelli), IMSA GTD/GTD Pro (Michelin), FIA WEC LMGT3 (Goodyear), DTM and national GT3

Ferrari 296 GT3

Ferrari's GT3 since 2023 (Evo update from 2026). It has a mid-engined 3.0 L 120° twin-turbo V6 (hybrid removed) and an Xtrac 6-speed transverse sequential gearbox. Compared to the 488 GT3 it has a shorter wheelbase and a lower, more compact engine, with a strong underbody/diffuser aero concept. The 2026 Evo brings revised suspension kinematics, a new ratio cascade, new splitter/floor/diffuser, more front brake cooling (+20 % airflow) and a rear wing that can be adjusted with a single screw, quick enough to change at a pit stop.

As with every GT3, the engine output and weight are set by BoP (turbo boost and weight), so setup work concentrates on the aero platform, tyres and drivability for mixed Pro/Am line-ups.

Specification

Mass~1,250 kg dry without fuel/driver (Ferrari figure); race minimum set by BoP
Power~600 cv nominal; actual output set by BoP (boost)
EngineF163 2,992 cc 120° V6 twin-turbo, turbos inside the V, mid-mounted
GearboxXtrac 6-speed transverse sequential, magnesium casing; Evo: new ratio cascade
DifferentialMechanical limited-slip differential (preload adjustable)
TyresSeries spec: Pirelli (GTWC/DTM), Michelin (IMSA), Goodyear (WEC LMGT3)
AeroUnderbody/diffuser-led aero, swan-neck rear wing; Evo: new splitter, floor, diffuser, LMGT3-derived rear arches and quick-adjust wing
BrakesSteel discs and racing calipers, racing ABS; Evo: +20 % front brake airflow
ElectronicsRacing ABS and TC (driver rotaries), homologated ECU and data logging
ChassisAluminium chassis with FIA cage; double wishbones front and rear on Evo

Regulations & BoP

  • Homologated GT3 (FIA/SRO): bodywork, aero devices, suspension geometry and gearbox are homologated. Only listed options may be used.
  • BoP: weight, turbo boost (power curve), and in some series fuel capacity/stint energy and ride-height or wing limits. Adjusted between events by SRO/IMSA/ACO.
  • Tyres: one supplier per series (Pirelli GTWC/DTM, Michelin IMSA, Goodyear WEC). Allocation-limited; WEC also bans tyre warmers.
  • Evo kit (2026): new aero, suspension kinematics and gearbox ratios homologated as an evolution. The original 2023 spec and the Evo can carry different BoP.
  • Driver ratings (FIA Platinum/Gold/Silver/Bronze) determine Pro/Pro-Am/Am categories and minimum drive times.

Engineering focus

  • Aero platform: ride height/rake vs wing (Evo quick-adjust wing allows balance changes at pit stops)
  • Turbo torque delivery and traction on exit: TC, rear ARB, diff preload
  • Tyre-pressure management with series-specific tyres and allocation limits
  • BoP-aware strategy: fuel per lap, stint length, drag level choice
  • Making the car drivable for Bronze/Silver drivers without compromising the Pro

What can be adjusted

ParameterRangeFreedomNotes
Front anti-roll barHomologated bars / blade positions◐ LimitedFirst mid-corner balance tool. 1 step stiffer ≈ +1–2 % front LLTD → more understeer mid-corner, sharper response in quick direction changes.
Rear anti-roll barHomologated bars / positions◐ LimitedTurbo torque out of slow corners makes rear roll stiffness a traction trade-off. Soften for traction, stiffen for rotation.
Springs (front / rear)Rates from homologated / manufacturer range◐ LimitedPlatform choice. Stiffer front holds the splitter height under braking. Ride-frequency targets for GT3 are typically ~2.5–3.5 Hz.
Bump stops / packersPacker thickness and bump-rubber type within supplier range● FreeOn high-downforce GT3s the bump rubber is effectively the aero platform spring at high speed. Adding packer lowers the speed or load at which the stop engages, so the axle gets stiffer at high speed and under heavy braking. More front packer holds the front up: less front downforce (aero balance moves rearward) and more front roll stiffness, so usually more high-speed understeer. To cure high-speed understeer, remove front packer or add rear packer to hold rake. Add front packer only when ride-height and aero-map data show the splitter/floor stalling or the skid touching.
ParameterRangeFreedomNotes
DampersMulti-way adjustable homologated dampers (LS/HS bump and rebound)● FreeClicks are free within the homologated unit. Use LS rebound for entry stability and LS bump for platform. Use HS settings for kerbs and bumps.
ParameterRangeFreedomNotes
Ride heights (front / rear) and rakeFree within homologated travel; some series/BoP set minimum heights◐ LimitedThe main aero balance tool on a GT3: +1 mm rear ride height (or -1 mm front) moves aero balance forward roughly 0.3–0.5 %. Check BoP/series minimum heights and plank/skid rules before chasing rake. Always re-check heights hot, with fuel load, as measured on the setup plate.
Camber (front / rear)Typically −3.5 to −4.5° front, −2.5 to −3.5° rear● FreeSet on tyre-temperature spread (aim ~8–12 °C inner-to-outer on hot pit temps) and on tyre-supplier camber limits where they exist. Front camber is a peak-lateral tool; too much costs braking stability and inner-shoulder wear.
Ballast / minimum weightBoP weight, plus success ballast in some series◆ BoP / homol.Ballast position (where the series allows) can be used to help weight distribution, but the amount is set by BoP.
ParameterRangeFreedomNotes
Toe (front / rear)Front ~0 to 2 mm total out; rear ~2–4 mm total in● FreeRear toe-in is a stability tool (more = more stable entry and power-down, but more drag and rear temperature). Front toe-out sharpens initial turn-in. Change in 0.5 mm steps — GT3s are very sensitive to rear toe.
ParameterRangeFreedomNotes
Rear wing angleHomologated range; Evo wing re-set with a single screw (quick pit-stop change); BoP may cap◐ LimitedEach step typically shifts aero balance ~1 % rearward and costs some top speed. BoP may cap the usable range. Balance wing against rake: wing for high-speed stability, rake/ride height for overall platform.
Front dive planes / gurney optionsHomologated options only◆ BoP / homol.Where homologated options exist, they are used to trim front aero to match a wing change.
ParameterRangeFreedomNotes
Brake biasDriver-adjustable balance bar (cockpit knob), typically ~54–60 % front● FreeMove rearward for rotation on entry, forward for stability and to protect the rear under ABS. On ABS cars the bias also changes which axle ABS intervenes on first — check ABS activity per axle in the data, not just lock-ups.
Master cylinder sizesFrom the homologated/manufacturer list◐ LimitedChanges pedal-force-to-pressure gain and the bias range available. Used to suit driver pedal feel (gentlemen drivers often want lower effort) rather than as a balance tool.
Brake ducts / blankingHomologated ducts; blanking/tape allowed◐ LimitedTarget disc and pad windows from the brake supplier. Over-cooling at cold tracks kills initial bite; under-cooling at Monza/Bahrain-type tracks causes fade and pad glazing.
Pad compoundManufacturer-approved compounds; series may restrict◐ LimitedEndurance pads trade initial bite for wear and temperature stability. Change pads with care: driver pedal reference and ABS calibration both move.
ABS levelMulti-position racing ABS● FreeHigher intervention = more stable but longer stops; lower = more aggressive. Wet races and worn tyres usually want more. Gentlemen drivers often benefit from a higher setting than pros.
ParameterRangeFreedomNotes
Power / torque (restrictor, boost, power map)Set by BoP each event◆ BoP / homol.Not a setup tool. The engineer manages around it: gearing, fuel per lap and drag level. Some series use torque sensors to police power curves.
Engine / fuel mapsHomologated maps only (e.g. race, fuel-save, safety car)◐ LimitedFuel-save maps and lift-and-coast targets are strategy tools. The torque curve itself is homologated.
Traction controlMulti-position TC (rotary)● FreeTC level is a real handling tool on exit: more TC hides poor traction, but heats the rears less. Set a baseline, then let the driver step through it as the tyres degrade. In data, compare wheel-speed slip with TC cut.
ParameterRangeFreedomNotes
Gear ratios / final driveHomologated set; usually one ratio set per car◆ BoP / homol.Effectively fixed. Gearing problems are solved through shift points and driving lines, not new ratios.
ParameterRangeFreedomNotes
Tyre pressuresHot targets from the tyre supplier; some series enforce minimum pressures● FreeGT3 tyres want a narrow hot window (often ~1.8–2.0 bar hot, supplier-dependent). Start pressures are chosen to hit target hot pressure by lap 2–3. Pressure is a balance tool only in small steps (~0.05 bar).
Tyre compound / allocationSingle spec per series (Pirelli in GTWC, Michelin in IMSA, Goodyear in WEC LMGT3); limited sets per event◆ BoP / homol.Plan the allocation: which sets for qualifying, which used sets for race stints and driver changes.
ParameterRangeFreedomNotes
Differential preload / rampsWithin homologated components◐ LimitedHigher preload = more stable entry and power-on understeer. Lower = better rotation but snappier. Change between events rather than sessions.

Typical complaints & first tools

Driver / car issueUsual first fix
Mid-corner understeerSoften front ARB or stiffen rear, check front camber/pressure on tyre temps
Exit wheelspin / power oversteer with turbo torqueTC up one step, soften rear ARB, lower diff preload ramp on drive only if available
High-speed understeer, low-speed balancedFirst check front ride height at speed against the aero map. If the front is above the stall region: remove front packer or add rear packer to keep rake, or reduce wing a step. Add front packer only if data shows the splitter stalling or the skid touching
Instability under braking into slow cornersBias forward, more rear toe-in, ABS up one step
Front brakes overheating (pre-Evo cars)Open ducts fully, check pad choice; Evo addresses this with +20 % cooling flow