Ferrari 296 Challenge
Ferrari's ninth one-make Challenge car (debut 2024) and the first with a V6. It is derived from the 296 GTB, but the hybrid system is removed and much of the aero comes from the 296 GT3. It is a road-derived car with a 7-speed DCT, e-Diff, brake-by-wire ABS EVO and carbon-ceramic CCM-R Plus brakes. It makes far more downforce than earlier Challenge cars (Ferrari quotes 870 kg at 250 km/h at maximum wing, +18 % vs the 488 Challenge Evo).
For the engineer, it is a spec car with spec tyres. The field is equal, so the work is in platform, tyre pressures, wing/rake balance and getting the driver (often a gentleman) confident with the electronic aids. Electronic systems (e-Diff, ABS EVO, TC) do a lot of the dynamic work, so tune the driver's use of them as much as the mechanical setup.
Specification
| Mass | 1,330 kg dry (Ferrari data); race-ready with driver and fuel considerably more |
| Power | 700 cv @ 7,500 rpm; 740 Nm @ 6,000 rpm (Ferrari data) |
| Engine | F163 2,992 cc 120° V6 twin-turbo, dry sump, turbos inside the V; hybrid removed |
| Gearbox | 7-speed F1 dual-clutch transmission (DCT) |
| Differential | e-Diff (electronically controlled limited slip) |
| Tyres | Pirelli slicks developed specifically for the car; 280/680 ZR19 front on 11J, 300/720 ZR19 rear on 12J |
| Aero | S-Duct front, double-element splitter flicks, underbody vortex generators, swan-neck rear wing with 7 positions; ~870 kg downforce @ 250 km/h at max wing |
| Brakes | CCM-R Plus carbon-ceramic discs, 408×38 mm front / 390×32 mm rear; ABS EVO brake-by-wire with 6-way chassis dynamic sensor |
| Electronics | TC/e-Diff, EPS, ABS EVO/EBD; Ferrari data logging; mandatory LTE marshalling antenna in Challenge |
| Chassis | Aluminium road-car chassis with FIA roll cage; wheelbase 2,600 mm; 140 L tank |
Regulations & BoP
- One-make spec car: chassis, engine, gearbox, electronics, aero and brakes are spec from Ferrari Corse Clienti. Only parts and settings permitted by the Ferrari Challenge technical regulations may be changed.
- No BoP: equal power and weight for all cars. Separate driver classifications (Trofeo Pirelli Pro/Pro-Am, Coppa Shell/Am) race together.
- Tyres: single Pirelli specification developed for the 296 Challenge, with a limited allocation per event.
- Sealed items: engine and ECU calibration, e-Diff/ABS EVO/TC software (only driver-selectable modes).
- Always check the current year's Challenge technical and sporting regulations. Several details (damper adjustability, exact allocations) vary by year and region and are not public in detail.
Engineering focus
- Tyre pressure management: identical cars make hot-pressure accuracy worth more than most mechanical changes
- Platform and rake: use wing (7 positions) and ride height together to set aero balance for the track
- Coaching use of the electronic aids (TC, e-Diff, ABS EVO modes) for drivers of very different levels
- Brake temperature management of the CCM-R Plus discs: enough heat for bite, without overheating pads
- Data comparison against the reference driver: braking points, minimum speeds and throttle pick-up (the car is equal, so the lap time gap is mostly the driver)
What can be adjusted
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Front anti-roll bar | Ferrari-supplied bar/positions only | ◐ Limited | First tool for mid-corner balance. Stiffer front = more mid-corner understeer, more stable on fast changes of direction. Because the e-Diff and ABS EVO handle a lot of the transient, ARB changes are more visible mid-corner than on entry or exit. |
| Rear anti-roll bar | Ferrari-supplied bar/positions only | ◐ Limited | Softening the rear helps traction on slow exits (the 700 cv turbo V6 has a lot of torque at low rpm). Stiffening rotates the car mid-corner but makes it less forgiving for amateur drivers. |
| Springs | Spec parts from Ferrari Corse Clienti; check current Challenge technical regulations | ◐ Limited | Treat spring rates as a platform choice for the event (bumpy street-type tracks vs smooth high-speed tracks), not a session-by-session tool. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Damper settings | Spec dampers; any click adjustment only within the window allowed by the series regulations | ◐ Limited | Use for transient feel (turn-in response, kerb compliance). Many Challenge teams run close to the factory baseline. Bigger gains usually come from ride height and tyre pressures. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Ride heights / rake | Adjustable above series minimums | ◐ Limited | Aero balance is designed to be insensitive to pitch (raised central floor, S-Duct). Rake still shifts balance, but less than on a GT3. Keep the front from bottoming under braking: the front underbody needs to keep working at low ride heights. |
| Camber | Within the range allowed by the uprights/series | ◐ Limited | Optimise on tyre temperatures. The Pirelli is designed for low wear, so wear is rarely the camber limit. Inner-shoulder overheating on long races is. |
| Corner weights | Via spring platforms | ● Free | Set cross-weight to 50 % with the driver aboard. An asymmetric car shows up as a left/right corner balance difference that drivers often blame on the diff. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Toe (front / rear) | — | ● Free | Rear toe-in for stability in high-speed sweepers. Front toe for turn-in sharpness. Small steps: on a road-car-based suspension the compliance steer adds to static toe. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Rear wing angle | 7 positions (Ferrari) | ◐ Limited | Main aero balance tool. The rear aero is dominated by the wing, the front by splitter and front floor. Max wing is used for the 870 kg reference figure. Each step moves balance rearward and costs top speed. |
| Front aero (splitter, flicks, dive planes) | — | ○ Fixed | Spec bodywork. Front aero is balanced against the wing only through rake and wing angle. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Brake distribution (EBD / ABS EVO) | Electronic distribution via ABS EVO/EBD; driver selectors as allowed by series | ◐ Limited | No classic balance bar to play with. ABS EVO estimates target slip per wheel. Brake-balance complaints are usually fixed through ABS mode choice, entry ride height and rear stability (rear ARB, toe) rather than bias. |
| Brake pads / discs | Spec CCM-R Plus discs and series-spec pads | ○ Fixed | CCM-R Plus discs are claimed to last about 3× a standard CCM disc. Manage temperatures and bedding rather than compounds. |
| Brake cooling | Spec ducts; blanking only where regulations allow | ◐ Limited | Carbon-ceramics need heat for consistent friction: watch disc temperatures at cold or short tracks. |
| ABS EVO mode | Modes/levels available on the car | ◐ Limited | More intervention for wet and worn tyres. Ferrari quotes ~6 % improvement in rear braking force use on turn-in from the target-slip strategy. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Engine power / maps | Single spec for all cars (sealed ECU) | ○ Fixed | Equal power across the grid. No BoP. |
| Traction control | Driver-selectable TC levels | ● Free | Key gentleman-driver tool. Coach the driver to step TC down as the tyres come in and up as they degrade or in the wet. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| e-Diff behaviour | Selected via driver/vehicle modes, not mechanically | ◐ Limited | Locking on entry gives stability, opening mid-corner gives rotation. Combined with TC, it determines exit behaviour. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Gear ratios | 7-speed DCT, road-derived ratios | ○ Fixed | Not adjustable. Shift points and use of the DCT's seamless shifts are the variables. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Tyre pressures | Within Pirelli recommendations; series may set minimums | ● Free | The biggest weekly lever in a spec series. Hit the hot target consistently across sessions with different track temperatures, and correct for sun/shade side. |
| Tyre allocation | Limited number of new Pirelli sets per event (series sporting rules) | ◆ BoP / homol. | Plan scrubbed vs new sets for qualifying and races. Track rubber build-up changes balance from Friday to Sunday. |
Typical complaints & first tools
| Driver / car issue | Usual first fix |
|---|---|
| Mid-corner understeer in slow corners | Soften front ARB one step or stiffen rear; check front camber/pressures on tyre temps |
| Snap oversteer on power out of slow corners | Raise TC level / review e-Diff mode, soften rear ARB; coach progressive throttle with the turbo torque |
| Unstable on entry, rear light under braking | More rear toe-in, check rear ride height (lower slightly), choose a more conservative ABS mode |
| High-speed understeer | Reduce rear wing one position or add rake; check front ride height under load is not too high |
| Balance drifts during the race as tyres heat up | Re-target start pressures so front and rear reach hot target together; check pressure build per axle in TPMS data |