Dallara IR-18 (IndyCar)
IndyCar's current car: the Dallara DW12/IR-12 tub with the IR-18 universal aero kit (2018), aeroscreen (2020) and, from mid-2024, a hybrid ERS (supercapacitor energy store with an MGU in the bellhousing, up to ~60 hp of deployment). Power comes from Honda or Chevrolet 2.2 L twin-turbo V6s, with boost set per track type (~550–700+ hp) and push-to-pass on road/street courses. There is no power steering. The IR-28 replaces it in 2028.
IndyCar is unique in this list because one car runs four very different configurations: road course, street course, short oval and superspeedway (Indy 500). Damper development is the main open area (teams design dampers in-house), and the driver has cockpit-adjustable front and rear ARBs at every track, and ovals add tools no other car here has: weight jacker, asymmetric setups and tyre stagger. The engineer has to manage aero kit choice, a heavy aeroscreen (higher CoG), oval asymmetry and Firestone primary/alternate tyre strategy.
Specification
| Mass | ~1,675 lb (~760 kg) road/street minimum in 2024 (pre-hybrid figure); the ERS adds ~42.5 kg, so check the current IndyCar rulebook |
| Power | ~550–700+ hp depending on boost level by track type; push-to-pass extra; hybrid adds up to ~60 hp |
| Engine | 2.2 L twin-turbo V6, Honda or Chevrolet |
| Gearbox | Xtrac 6-speed sequential, paddle shift |
| Differential | Limited-slip (approved components); oval configurations differ from road |
| Tyres | Firestone Firehawk: primary and alternate (red) compounds on road/street; oval-specific tyres; rain tyres |
| Aero | IR-18 kit: road/street/short-oval high-downforce and superspeedway low-drag configurations; aeroscreen |
| Brakes | Carbon brakes (road/street); no power steering |
| Electronics | Spec ECU, push-to-pass, ERS deployment control, data logging |
| Chassis | Dallara DW12 carbon tub + IR-18 bodywork and aeroscreen |
| Hybrid | Supercapacitor ESS + MGU in bellhousing (from mid-2024), up to ~60 hp, driver-deployed |
Regulations & BoP
- IndyCar: spec Dallara chassis and aero kit; Honda or Chevrolet engines.
- Hybrid ERS since mid-2024.
- Push-to-pass on road/street courses.
- Dampers: open team development.
- Tyres: Firestone; primary and alternate compounds.
- IR-28 replaces IR-18 in 2028.
Engineering focus
- Configuration-specific setup (road, street, short oval, superspeedway)
- Damper development
- Oval asymmetric setup: weight jacker, ARBs, stagger
- Tyre strategy (primary vs alternate)
- Fuel and ERS strategy
What can be adjusted
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Springs (corner) | Team choice of rates | ● Free | Road course: balance mechanical grip vs platform. Oval: asymmetric rates (stiffer right side typical) to manage roll and banking loads. |
| Third springs (front / rear) | Team choice of rates and gaps | ● Free | Heave control under aero load. Especially important on superspeedways, where ride height must stay in a tight window for drag and stability. |
| Anti-roll bars | Bar choice; front and rear driver-adjustable from the cockpit at all track types | ● Free | Main mid-corner balance tool. Road/street: the driver trims mid-corner balance through a stint as fuel burns and tyres wear. Ovals: used together with the weight jacker. |
| Weight jacker (ovals) | Cockpit-adjustable cross-weight | ● Free | Driver changes cross-weight on ovals to trim balance through a stint. Adding wedge = more understeer typically. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Dampers (team-developed) | Open development | ● Free | The main area for team engineering differentiation. Budgets for damper R&D are large. Valving defines platform and transient response. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Ride heights / rake | Within minimums per configuration | ◐ Limited | Aero balance and platform. On superspeedways a few mm of ride height changes both drag and stability. Aeroscreen mass also raises the CoG versus the pre-2020 car. |
| Camber | Within mechanical range | ● Free | Road/street: roughly symmetric. Ovals: asymmetric (left side toward positive, right side negative) so both tyres work in a constant left-hand turn. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Toe (front / rear) | — | ● Free | Rear toe-in for stability. Ovals use asymmetric toe settings to help the car turn left with minimum drag. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Front wing mainplane / flap angles | Within IR-18 kit range per configuration | ◐ Limited | Front aero balance trim. On ovals drivers can also ask for front flap changes at pit stops to deal with traffic and tyre wear. |
| Rear wing angle / gurney / wickers | Within IR-18 kit range per configuration | ◐ Limited | Rear downforce and drag. Indy 500: qualifying trim runs minimum drag, race trim needs enough downforce to run in traffic. |
| Aero configuration (road/short oval vs superspeedway) | Mandated by track type | ◆ BoP / homol. | Different body parts and wing options per configuration. Superspeedway trim is a separate engineering programme. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Brake bias | Driver-adjustable | ● Free | Driver-adjustable. Heavy use on street circuits (St. Petersburg, Long Beach). No power steering, so brake release also shapes steering load on entry. |
| Brake ducts | Approved duct options | ◐ Limited | Street circuits are hard on brakes. Open ducts there and close them at fast road courses. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Boost level | Set by IndyCar per track type | ◆ BoP / homol. | Not a setup item. Boost differs between road/street, short-oval and superspeedway configurations. |
| Push-to-pass | Fixed time allotment per race (road/street) | ◐ Limited | Strategy tool for attack and defence. Remaining time is shown to rivals and on TV, so its use is tactical. |
| Hybrid ERS deployment | Driver-deployed; regen via braking/paddle | ◐ Limited | Energy recovered under braking (and via driver paddle) is redeployed on demand. Engineers plan where to use it for lap time and where to keep it for overtakes/defence. |
| Fuel mixture maps | Manufacturer maps; driver-selectable | ◐ Limited | Fuel saving decides strategy (an extra lap per stint can save a pit stop). Track fuel per lap against target in real time. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Gear ratios | From approved Xtrac ratio sets | ◐ Limited | Choose per track: top-gear speed on ovals, slow hairpins on street circuits. Use simulation and previous-year data. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Differential | Approved components | ◐ Limited | Road/street: entry stability vs rotation and traction. Ovals: diff choice affects how the car turns left under steady throttle. |
| Parameter | Range | Freedom | Notes |
|---|---|---|---|
| Tyre pressures | Within Firestone recommendations | ● Free | Key lever. On ovals pressures are set per corner (asymmetric) because the right-side tyres carry most of the load. |
| Tyre stagger (ovals) | Within Firestone-supplied sizes | ◐ Limited | Larger right-rear helps car turn left. Stagger is a major oval balance tool. |
| Tyre compound / allocation | Primary and alternate; limited sets | ◆ BoP / homol. | Alternates (reds) are faster but degrade more. Both compounds must be used in road/street races. Choose stint order and length. |
Typical complaints & first tools
| Driver / car issue | Usual first fix |
|---|---|
| Oval: loose in traffic | Driver adds wedge with weight jacker, adjusts cockpit ARB; front flap down at next stop |
| Road course: mid-corner understeer | Softer front ARB, more front flap, check front pressures |
| Street circuit: bumpy, poor traction | Softer springs and HS damping, raise ride height, soften rear ARB |
| Superspeedway: too much drag / not enough top speed | Reduce wing angle and trim, optimise ride heights and toe for drag |
| Heavy steering on street circuits (no power steering) | Reduce caster/mechanical trail within allowed range, review front ARB and front tyre pressures |