Learn / Driver Analysis / Consistency analysis and lap-time variation
L2 · Practitioner

Consistency analysis and lap-time variation

Race pace is won by consistency. Quantify it with lap-time statistics, sector reports and per-corner metrics, separate it from fuel and tyre effects, and recognise the data signatures of fatigue.

Consistency analysis and lap-time variation: L1 Foundation explanation

Fast once vs fast every lap. A driver can beat the competition in qualifying but lose over a race because of larger lap-time degradation and scatter. Consistency is therefore a strategic input: who starts, who does the night stint, who is put on old tyres.

Simple tools:

  • Average and standard deviation of lap time over clean laps. Segers' endurance example: driver Blue averaged 2:07.8 with σ = 0.8 s; Red 2:06.1 with σ = 0.6 s.
  • Sector report with highlighting: the best sector time per segment highlighted, and all times within a tolerance (Segers used 2 %) shaded. More shading = more consistent. A 2 % window is generous (on a 94 s lap, 2 % is 1.9 s); for pros a few tenths per sector is the real target.
  • Run chart of lap times with in/out laps, safety-car and traffic laps marked.

Typical clean-air consistency (σ of lap time over a stint, after fuel/tyre trends are removed): top professionals ~0.15–0.3 s; good amateurs 0.4–0.8 s. Multi-class traffic in endurance races inflates raw σ massively – always clean the data first.

Key formulas

Fuel-corrected lap time
tcorr(n)=t(n)−kfuel mfuel(n)t_{corr}(n) = t(n) - k_{fuel}\, m_{fuel}(n)
kfuelk_{fuel}
lap-time sensitivity to fuel mass (s/kg)
mfuel(n)m_{fuel}(n)
fuel mass on lap n (kg)
Stint lap-time model (k_fuel fixed beforehand)
t(n)−kfuel mfuel(n)=t0+d ntyre+εnt(n) - k_{fuel}\, m_{fuel}(n) = t_0 + d\, n_{tyre} + \varepsilon_n
t0t_0
base pace (s)
kfuelk_{fuel}
fuel sensitivity from lap sim or a dedicated test (s/kg) – not fitted on the same stint
d
degradation rate (s/lap)
εn\varepsilon_n
residual (driver consistency + traffic)
Standard deviation of lap times
σ=1N−1∑i=1N(ti−tˉ)2\sigma = \sqrt{\frac{1}{N-1}\sum_{i=1}^{N}\left(t_i - \bar{t}\right)^2}

Trackside takeaways

  • Clean the data (in/out, SC, traffic laps) before computing consistency.

  • Fuel-correct lap times; the trend is degradation, the scatter is the driver.

  • Use per-corner σ (brake point, min speed, pickup) to find where inconsistency lives.

  • Use median/IQR or trimmed statistics – lap-time distributions are skewed.

  • Fatigue shows as gearshift errors, earlier braking and more corrections late in stints.

On your car

Pro-Am and Bronze drive-time rules make per-driver consistency a strategy input; the Bronze driver’s σ often matters more than the Pro’s best lap.

Check yourself

Question 1 / 5L2 · Practitioner

A driver’s raw lap times improve by 1.0 s over a 25-lap stint while burning 60 kg of fuel. The fuel sensitivity is 0.03 s/kg. What does this say about tyre degradation?

Further reading
  • Segers – Analysis Techniques for Racecar Data Acquisition — §16.2 Lap Time Variation During a Race (§16.2.1–16.2.3)
  • Segers – Analysis Techniques for Racecar Data Acquisition — §14.8 Driver Consistency over Multiple Laps
  • Segers – Analysis Techniques for Racecar Data Acquisition — §14.7.2 How to Determine the Correct Driving Line · average curvature per lap and lap-time σ