Learn / Driver Analysis / Comparing two drivers and coaching with data
L2 · Practitioner

Comparing two drivers and coaching with data

Comparison is the heart of driver development. Use a structured process – speed and delta first, then inputs, then line – and deliver it in a way the driver can absorb, acknowledging that car balance and driver technique are intertwined.

Comparing two drivers and coaching with data: L1 Foundation explanation

Two pitfalls (Segers §14.1):

  1. Driver and chassis are intertwined. What looks like a driver error may be an unbalanced car – and vice versa. Always combine the driver's comments with data.
  2. Drivers are human. Even well-founded, tactful criticism can dent confidence. Often the best approach is to guide drivers to discover the issue themselves.

Make drivers data-literate. Drivers should be able to use the analysis software, understand basic techniques, and have enough vehicle-dynamics knowledge to relate their driving to the car's behaviour. Give them the data quickly, while the laps are fresh in their memory.

A basic driver template: speed, throttle, front brake pressure, gear, RPM, steering, with delta time to a reference lap.

Four characteristics to evaluate (Segers §14.2):

  • Performance – results: minimum corner speeds, peak lateral g, peak deceleration, shift times, lap time.
  • Smoothness – inputs that don't upset the car (throttle, brake release, steering).
  • Response – delays between actions: throttle-off to brake-on, brake-off to throttle-on; responses to slides.
  • Consistency – repeatability of all the above.

Key formulas

Time cost of a speed deficit over a section
Δt≈∫s1s2Vref(s)−V(s)Vref(s)2 ds\Delta t \approx \int_{s_1}^{s_2} \frac{V_{ref}(s) - V(s)}{V_{ref}(s)^2}\,ds
VrefV_{ref}
reference driver speed (m/s)
V
driver speed (m/s)

Trackside takeaways

  • Compare under the same conditions: car, session, tyre age, fuel.

  • Speed and delta first, inputs second, line third – then explain with physics.

  • Give one or two actionable references per corner, not a list of faults.

  • Use the driver’s own best laps as references to protect confidence.

  • Sometimes the fastest coaching is a setup that suits the slower driver.

On your car

Pro-Am line-ups: overlays of Am vs Pro are the daily tool; ABS and TC differences (map choice) must be equal before comparing.

Check yourself

Question 1 / 3L2 · Practitioner

What is the best first step when comparing two drivers’ laps from the same session?

Further reading
  • Segers – Analysis Techniques for Racecar Data Acquisition — §14.1 Improving Driver Performance
  • Segers – Analysis Techniques for Racecar Data Acquisition — §14.2 Driving Style Evaluation
  • Segers – Analysis Techniques for Racecar Data Acquisition — Ch. 3 §3.3 Comparing Laps