Learn / Tyres / Operating windows: temperature, hot vs cold pressure, TPMS
L1 · Foundation

Operating windows: temperature, hot vs cold pressure, TPMS

A race tyre only delivers its grip inside a temperature and pressure window. You set cold pressures, but the tyre works at hot pressures, so the engineer’s job is predicting the build-up and verifying it with TPMS.

Operating windows: temperature, hot vs cold pressure, TPMS: L1 Foundation explanation

A slick compound's friction depends strongly on temperature. Too cold and the rubber is stiff and glassy (poor grip, risk of graining); too hot and it becomes soft and greasy (grip falls, wear and blistering rise). Each compound has a working window. As rough orders of magnitude for surface temperature: harder compounds roughly 90–120 °C, softer ones 70–100 °C. Read the supplier data for your tyre. Segers §8.5 shows how to find the window from your own data: plot lateral G against tyre temperature and look at where the upper envelope peaks.

Pressure controls patch size and carcass stiffness. You set cold pressure in the garage, but the tyre works at hot pressure. Gas in a closed volume obeys roughly p/Tp/T = constant (absolute units):

phot,abs=pcold,abs ThotTcoldp_{hot,abs} = p_{cold,abs}\,\frac{T_{hot}}{T_{cold}}

Example: cold 1.40 bar gauge at 20 °C (2.41 bar absolute, 293 K). Air temperature in the tyre at running is 80 °C (353 K): 2.41×353/293=2.912.41 \times 353/293 = 2.91 bar abs = 1.90 bar gauge. That is +0.5 bar, roughly 0.1 bar per 12 °C of gas temperature at these pressures.

Typical hot targets (orders of magnitude; the supplier sets the real numbers): GT3 slicks ~1.8–2.0 bar; Cup cars similar; LMP/Hypercar ~1.7–1.9 bar; formula cars (F4–F2) ~1.3–1.7 bar.

Remember gauge vs absolute: gauges and TPMS read gauge pressure (relative to atmosphere), but the gas law needs absolute pressure, so add ~1.013 bar. Forgetting it is the classic error: scaling the gauge value by Thot/TcoldT_{hot}/T_{cold} predicts only about 55–60% of the real build-up (here +0.29 instead of +0.49 bar), so the cold set comes out too high and the tyre runs over-pressure.

Key formulas

Ideal-gas pressure build-up (absolute units)
phot,abs=pcold,abs ThotTcold,pabs=pgauge+1.013 barp_{hot,abs} = p_{cold,abs}\,\dfrac{T_{hot}}{T_{cold}}, \quad p_{abs} = p_{gauge} + 1.013\,\text{bar}
T
gas temperature in kelvin
Equivalent cold pressure from TPMS
pcold,gauge=(pTPMS+1.013) Tref+273.15TTPMS+273.15−1.013p_{cold,gauge} = (p_{TPMS} + 1.013)\,\dfrac{T_{ref} + 273.15}{T_{TPMS} + 273.15} - 1.013
pTPMSp_{TPMS}
measured gauge pressure (bar)
TTPMST_{TPMS}
TPMS gas temperature (°C)
TrefT_{ref}
reference temperature (°C)
Rule of thumb build-up
dpdT=pabsT≈0.008 bar/K  (≈0.1 bar per 12 K)\dfrac{dp}{dT} = \dfrac{p_{abs}}{T} \approx 0.008\,\text{bar/K} \;(\approx 0.1\,\text{bar per } 12\,\text{K})

Trackside takeaways

  • You set cold pressure; the tyre works at hot pressure. Always do gas-law maths in absolute units.

  • ~0.1 bar per 12 °C of gas temperature at typical race pressures.

  • Pressures take several laps (often 4–7) to stabilise. Don’t judge balance on lap 2.

  • Find your real temperature window from data: lateral G vs tyre temp, upper envelope.

  • Pressure changes tyre vertical stiffness too, so on aero cars it moves ride height and aero balance.

  • Respect supplier and regulation minimum pressures. TPMS-enforced penalties are common.

On your car

No tyre warmers in most major GT3 championships, so the out-lap and the first 2–4 laps are cold-tyre laps. Minimum running pressures are monitored by TPMS in many series. Build-up from cold is typically ~0.4–0.7 bar depending on track and ambient.

Check yourself

Question 1 / 4L1 · Foundation

A tyre is set to 1.50 bar (gauge) at 20 °C. At running the gas temperature is 75 °C. Approximately what is the hot gauge pressure?

Further reading
  • Segers – Analysis Techniques for Racecar Data Acquisition — §8.2 Working with Tire Pressure Monitoring Systems · Stabilisation, RF dropouts, ideal gas law
  • Segers – Analysis Techniques for Racecar Data Acquisition — §8.4 Where Does Tire Temperature Come From?
  • Segers – Analysis Techniques for Racecar Data Acquisition — §8.5 Working Temperature Range of the Tires
  • Milliken & Milliken – Race Car Vehicle Dynamics — Ch. 2 Tire Behavior · Temperature and pressure effects