Diff effect on yaw: entry stability, mid-corner understeer, exit traction
A left/right drive or braking force difference produces a yaw moment ΔF·t/2. Its sign depends on which wheel is faster, so the same diff stabilises entry, resists mid-corner rotation and can either push or snap on exit.
Diff effect on yaw: entry stability, mid-corner understeer, exit traction: L1 Foundation explanation
If the two rear tyres produce different longitudinal forces, the car feels a yaw moment about its vertical axis:
Example (GT3, = 0.34 m, rear track 1.6 m, locking Nm), with matched conditions:
- Exit at 1.0 g, 2000 Nm axle torque: ≈ 120 + 0.38 × 2000 ≈ 880 Nm → ΔF ≈ 2.6 kN → ≈ 2.1 kNm. The rear axle lateral force (≈ 7 kN acting ≈ 1.2 m behind the CG) gives ≈ 8 kNm. The diff moment is ≈ 25 % of that — a major balance lever.
- Mid-corner at 1.5 g on preload alone (input ≈ 200 Nm): ≈ 200 Nm → ≈ 0.45 kNm against ≈ 12 kNm, only ≈ 3–4 %, yet still enough for the driver to feel a lazy apex.
Using the rule "locking torque goes to the slower wheel", walk through a corner:
Entry (braking, coast, engine braking): outside wheel is faster → coast locking puts more braking on the outside wheel → moment resisting rotation → stability, less turn-in. More coast locking/preload = more stable, lazier entry. Too little = rear nervous on lift-off and downshifts.
Mid-corner (neutral throttle): outside still faster → preload adds drive to the inside / braking to the outside → resists rotation → mid-corner understeer. Slow corners feel it most: the fixed diff moment is a larger share of the low tyre forces (little downforce), and a large makes an axle that stays stuck scrub heavily. (A slipping clutch transfers the same torque whatever the size of the speed difference.) Less preload = better rotation.
Exit (power):
- Early, while no wheel spins: outside faster → more torque to inside → resists rotation — power understeer.
- As throttle rises the inside wheel (unloaded) starts to spin and becomes faster → torque flips to the outside → moment promotes rotation → power oversteer, potentially sudden. More drive locking = more traction and more phase-1 understeer, with a sharper transition to phase 2.
This is why diffs are explained badly by "more lock = more understeer". It is true on entry and mid-corner, and in early exit — but at high throttle with an unloaded inside wheel, more lock means more oversteer (and more traction).
Diff effect on yaw: entry stability, mid-corner understeer, exit traction: L2 Practitioner explanation
Driver language → diff phase mapping:
| Driver says | Phase / mechanism | Diff direction |
|---|---|---|
| "Rear is nervous when I lift / on downshifts" | coast, too little locking | more coast lock (lower coast ramp angle) or more preload; check blip |
| "Car won't turn in on the brakes" | coast, too much locking | less coast lock / preload |
| "Lazy at the apex in hairpins" | mid, preload resisting yaw | less preload |
| "Inside rear lights up, poor drive" | exit, too little drive lock | more drive lock (lower drive ramp angle, more faces) |
| "Pushes on power, then snaps" | exit, high drive lock with state flip | first reduce drive lock; then test preload in BOTH directions (higher preload widens the stuck band, which can delay and sharpen the flip; lower preload + ramp can make it earlier and progressive); check rear roll stiffness and TC slip target |
| "Steering heavy, car fights me on exit" (FWD) | front drive lock, torque steer | less preload/drive lock |
Interactions you must account for:
- Rear anti-roll bar / roll stiffness: a stiffer rear increases inside-rear unloading → more inside spin → more reliance on diff locking. Diff and rear roll stiffness are solved together.
- TC: an open-ish diff with inside spin makes TC cut engine torque for both wheels; more locking reduces TC activity (see TC lesson).
- Brake balance & engine braking map: entry stability is the sum of brake balance, engine braking and coast lock — change one at a time and note which.
- Gear: wheel torque, hence locking through ramps, is larger in low gears. A diff that is fine in 4th-gear corners can be too locked in 2nd-gear hairpins.
- Corner speed: slow corners have low aero load (the diff moment is a larger share of the yaw balance), high wheel torque in low gears (ramp locking) and a large (heavy scrub if the axle stays stuck), so diff effects dominate there; in fast corners aero and springs dominate.
Misconception check: "more locking always means more stability". On coast, yes. On power with an unloaded inside wheel, more locking puts more force on the outside wheel — a pro-yaw moment and earlier rear saturation. Highly locked diffs make exits faster but more abrupt and demand a more precise throttle foot.
Diff effect on yaw: entry stability, mid-corner understeer, exit traction: L3 Advanced explanation
Yaw moment with tyre-limited forces. Let the diff lock with capacity and the wheels rotate at different speeds. The axle drive torque splits as , , giving
with the sign negative (anti-yaw) when the outside wheel is faster and positive (pro-yaw) when the inside wheel is faster. When the diff does not slip (locked state), and the split is set by the tyres' longitudinal stiffness: the outside tyre is forced to negative relative slip, the inside to positive, generating an anti-yaw moment ≈ per tyre pair (with the longitudinal slip stiffness), limited by . At small radius and low speed ( large) this moment saturates at the lock capacity.
State transitions are the real handling problem. The diff state can switch between: slipping with outside faster → stuck → slipping with inside faster. Over the whole transition the moment travels from to , a swing of . Inside the stuck band it changes continuously as the tyre forces evolve. The final breakaway, sharpened by the static-to-dynamic friction drop and by the inside tyre passing its force peak, can happen within tens of ms. The driver experiences a change of yaw moment of several kNm without having changed steering — the "snap". A high preload makes the locked band wider (the diff stays locked longer), which can make the transition later and harder; a lower preload with stronger ramps can make it earlier and progressive. There is no universal rule — test both directions and read the data.
Combined-slip view. The outside rear has more vertical load, so giving it more drive torque (inside spinning) uses capacity it has — traction rises — but the inside rear, already spinning, has lost lateral capacity. Net rear lateral force can drop even as drive rises: the classic exit oversteer of a highly locked diff on a car with stiff rear roll stiffness. Softer rear roll stiffness keeps the inside loaded, delays the spin, and lets you run more locking — again, diff and ARB are one system.
Stability analysis. Linearising, a stuck axle gives each tyre a slip of , so and a yaw-damping derivative (with the longitudinal slip stiffness per tyre, N per unit slip; equivalently with the axle total). A viscous (speed-sensing) diff adds a similar, smaller term. It increases yaw damping (more stable, less responsive) — the transient analogue of the steady-state understeer contribution (RCVD Ch. 5–6 framework). That's why drivers describe high coast/preload as "stable but lazy".
Key formulas
Trackside takeaways
Diff yaw moment = ΔF·t/2 — up to ~25 % of the rear axle’s lateral moment on low-gear exits, only a few % mid-corner on preload, yet still felt by the driver.
Outside wheel faster (entry, mid, early exit) → locking resists rotation.
Inside wheel faster (inside spin on exit) → locking promotes rotation: more lock = more oversteer there.
"Pushes then snaps" = diff state flip; tune the transition, not just the amount.
Diff, rear roll stiffness, TC, engine braking and brake balance interact — change one at a time.
Diff effects dominate in slow corners (large ΔV/V, low aero).
On your car
Slow-corner entry stability vs rotation is often tuned with preload; drivers sometimes compensate on the wheel with engine-braking maps where available.
Check yourself
On corner entry with engine braking, more coast locking will tend to:
- Milliken & Milliken – Race Car Vehicle Dynamics — Ch. 20 Driving and Braking · differential yaw moments and their effect on steady-state balance
- Milliken & Milliken – Race Car Vehicle Dynamics — Ch. 5 Simplified Steady-State Stability and Control
- Milliken & Milliken – Race Car Vehicle Dynamics — Ch. 6 Simplified Transient Stability and Control · yaw damping