Front heave too soft: ride height at 300 km/h
Situation. Hypercar at Monza. To ride the kerbs at the chicanes better, the team softened the front heave spring from an effective 420 N/mm to 300 N/mm at the tyre contact (lap B, orange) – static ride heights unchanged (front 40 mm). Lap A (blue) is the baseline. The floor/plank sits at the front ride-height reference.
Your task. Compare front and rear ride height on the straights and in the braking zones from ~300 km/h. Separate the aero and pitch contributions, and judge whether lap B's platform is acceptable.
Note: in this simulation the aero map is not ride-height sensitive, so both laps have the same lap time – in the real car they would not.
| Corner | Brake pt [m] | Entry [km/h] | Min [km/h] | Exit +100 m [km/h] | Segment [s] | Δ seg (B−A) |
|---|---|---|---|---|---|---|
| T1 Rettifilo (R) | 136 / 136 | 307 / 307 | 65.1 / 65.1 | 148 / 148 | 15.196 / 15.196 | 0.000 |
| T2 Rettifilo (L) | 6 / 6 | 93 / 93 | 72.4 / 72.4 | 175 / 175 | 1.976 / 1.976 | 0.000 |
| T3 Curva Grande | — / — | 240 / 240 | 240.2 / 240.2 | 293 / 293 | 13.201 / 13.201 | 0.000 |
| T4 Roggia (L) | 128 / 128 | 303 / 303 | 79.3 / 79.3 | 151 / 151 | 8.909 / 8.909 | 0.000 |
| T5 Roggia (R) | 8 / 8 | 102 / 102 | 82.6 / 82.6 | 178 / 178 | 1.832 / 1.832 | 0.000 |
| T6 Lesmo 1 | 36 / 36 | 230 / 230 | 167.4 / 167.4 | 211 / 211 | 8.781 / 8.781 | 0.000 |
| T7 Lesmo 2 | 48 / 48 | 225 / 225 | 141.5 / 141.5 | 199 / 199 | 5.492 / 5.492 | 0.000 |
| T8 Ascari (L) | 88 / 88 | 289 / 289 | 141.5 / 141.5 | 174 / 174 | 14.413 / 14.413 | 0.000 |
| T9 Ascari (R) | — / — | 163 / 163 | 162.9 / 162.9 | 214 / 214 | 2.886 / 2.886 | 0.000 |
| T10 Ascari (L) | — / — | 188 / 188 | 188.3 / 188.3 | 241 / 241 | 2.387 / 2.387 | 0.000 |
| T11 Parabolica | 60 / 60 | 301 / 301 | 200.4 / 200.4 | 230 / 230 | 19.353 / 19.353 | 0.000 |
Your analysis
At a steady ~305 km/h on the main straight (longG ≈ 0), lap A shows front ride height ~26 mm (static 40 mm, front heave 420 N/mm) and rear ~41 mm (static 60 mm, rear heave 460 N/mm). Both rates are axle rates at the tyre contact. Estimate the total downforce and the front aero balance.