# Throttle application: full-throttle %, throttle acceptance, pickup and hesitation

> The throttle is the driver’s primary interface. Histograms, full-throttle time, throttle acceptance, throttle speed and coasting metrics reveal whether a driver is too careful, too aggressive, or fighting the car.

Area: Driver Analysis · Starting level: L1 Foundation · Updated 2026-11-16
Source page: https://race-engineer-academy.vercel.app/lesson/driver-throttle-application

## L1 · Foundation

**More power = thinner margin.** Throttle errors come in three pairs – under- or over-application, early or late, slow or abrupt – and every extra kilowatt narrows the window between them.

**Basic tools:**

- **Throttle histogram** – % of lap time in each throttle band. Ideal: a tall bar at 100 %, a bar at 0 % (braking), and little in between. A driver with high part-throttle bins is modulating – often "tap-dancing" on the pedal.
- **Average throttle per lap** – a performance statistic; generally higher = faster.
- **Full-throttle time %** – time with throttle above ~95–98 % divided by lap time. Segers' Donington example: 63.85 % vs 63.23 % for two drivers whose laps differed by 0.28 s.
- **Coasting** – neither throttle nor brake (TP < 5 % and brake < 5 bar). Before braking it is always lost time; after braking, a short neutral phase can be deliberate to settle the car.

**Classic inexperienced pattern (Segers):** the driver brakes too early and too much, realises he is too slow mid-corner, and goes back on the throttle while the tyres are still at maximum lateral load. The driven wheels spin, he lifts, waits – and reaches full throttle *later* than a driver who carried more entry speed, accepted a lower minimum speed and then went to full power in one smooth motion. The second driver was 2 s per lap faster.

## L2 · Practitioner

**Throttle acceptance.** Define, per corner,

$$TA = 100\cdot\frac{G_{lat}\ \text{at full throttle}}{G_{lat,max}\ \text{in the corner}}$$

– how much lateral load the driver is still using when reaching full throttle. Segers' Donington example: McLean's – peak 1.61 g, full throttle reached at 1.23 g → 76 %; Coppice – similar speed, peak 1.60 g, full throttle at 1.45 g → 91 %. Same driver, same car: he is a bit careful in McLean's. Buddy Fey's targets: ~95 % for cars under ~150 hp, ~80 % above ~400 hp.

A **low** throttle acceptance means either a careful driver or a car with an exit problem (oversteer or understeer) – check balance channels and ask the driver before coaching. A **too-early** throttle shows wheelspin, TC intervention, opposite lock and a lift.

**Throttle speed** $dTP/dt$ (%/s; log throttle at ≥ 20 Hz, preferably 100 Hz). A fluctuating throttle-speed trace on exit means pitch oscillation and tyre-load fluctuation – unsettled exits. For a lap metric, average only the positive values below full throttle so lifts and full-throttle zeros don't bias it.

**Pickup and hesitation.** Look at the *pickup point* (first throttle application after the brake) relative to the apex/minimum speed, and for **hesitation**: a partial lift after pickup, often 10–30 % for 0.2–0.5 s. Hesitation usually means the car didn't feel ready (mid-corner oversteer, poor traction, entry speed too high) or the line was too tight. Map it per corner – the same hesitation every lap in one corner is a car/line issue; random hesitations suggest driver confidence.

**Typical full-throttle % (dry, GT3):** Monza ~70 %, Spa ~60–65 %, Barcelona ~55 %, Hungaroring ~50 %. Fuel saving drops it a few % (Segers shows a ~5 % deficit for a driver saving fuel to avoid a stop); tyre degradation lowers it lap by lap through a stint.

## L3 · Advanced

**Separating driver and car on exit.** Overlay throttle, rear slip ratio (or TC cut/intervention channel), steering and lateral g:

- **Traction-limited exit:** throttle progressive, slip ratio at the peak-traction value (typically 6–12 % for slicks), TC active – the driver is at the limit; improve car traction (diff, rear ARB, damper, ride height) rather than coaching.
- **Balance-limited exit:** throttle held part-open while steering is still increasing (understeer) or reducing with corrections (oversteer) – setup issue unless caused by entry speed.
- **Confidence-limited exit:** low throttle acceptance, no slip, no correction, lateral g already falling – the driver could be more aggressive; show a reference lap.

**Throttle speed vs tyre life.** Segers shows a pro whose average throttle speed changes little over a stint while adapting modulation to falling grip, and a less experienced driver whose throttle speed falls markedly as tyres degrade – with more lap-time scatter. Run charts of per-lap throttle metrics are a quick indicator of how a driver adapts to degradation.

**Power and drivetrain context.** Turbo lag, torque maps and TC settings shape throttle traces: a pedal trace is not torque. On drive-by-wire cars compare pedal position with throttle-body position and ECU torque request; on hybrids (Hypercar) the driver's pedal maps to a total torque request split between ICE and MGU. Engine maps can deliberately soften low-pedal torque for driveability.

**Building per-corner KPIs.** Implement two math channels per corner: max |lat g| held until corner end, and lat g latched at the moment throttle first exceeds 98 %. Export the table per lap and plot throttle acceptance per corner across a qualifying run – Segers' Navarra example shows a driver whose best values in each corner came on different laps: the ideal lap was never put together.

## Key formulas

**Full-throttle time (% of lap)**

$$FT = \frac{100}{t_{lap}}\int_0^{t_{lap}} \left(TP > 95\%\right) dt$$

- TP: throttle position (%)
- t_{lap}: lap time (s)

**Throttle acceptance**

$$TA = 100\cdot\frac{|G_{lat}|_{TP=100\%}}{|G_{lat}|_{max}}$$


**Throttle speed**

$$\dot{TP} = \frac{dTP}{dt}$$

- \dot{TP}: %/s

**Coasting condition**

$$C = (TP < 5\%)\cdot(P_{brake} < 5\,\text{bar})$$


## Trackside takeaways

- High part-throttle histogram bins reveal pedal modulation (“tap-dancing”).
- Throttle acceptance ~80 % for high-power cars, ~95 % for low-power cars are reasonable targets.
- Low throttle acceptance can be the car (balance/traction) – check slip, TC and steering before coaching.
- Hesitation that repeats in one corner is a car/line issue; random hesitation is confidence.
- Full-throttle % falls with fuel saving and tyre degradation – compare like with like.

## By car category

### GT3

500+ hp with TC: compare TC intervention per corner between drivers; a driver relying on TC may look aggressive on throttle but lose drive due to power cuts.

### TCR

Front-wheel drive: early throttle produces inside-front wheelspin and understeer; throttle acceptance is lower and exit line matters more.

### Formula 4

Low power: the car should be near full throttle almost as soon as the apex is passed – acceptance targets near 95 %. Part-throttle mid-corner usually means lost minimum speed.

### Formula Regional

Moderate power with downforce: drivers learn to commit to throttle at high lateral g; acceptance values 85–90 % are common in fast corners.

### Hypercar (LMH/LMDh)

The pedal maps to a total torque request: ICE plus front-axle MGU on LMH 4WD cars (only above the BoP deployment speed), ICE plus the spec rear-axle MGU on LMDh. Analyse axle torque channels, not just the pedal.

### One-make Cup

No TC on some cup cars – throttle smoothness and slip control are pure driver skill and a key differentiator between team-mates.

## References

- Segers, Analysis Techniques for Racecar Data Acquisition, 2nd ed. (SAE 2014): §14.3 Throttle (§14.3.1 Histogram, §14.3.2 Full Throttle Time, §14.3.3 Throttle Acceptance, §14.3.4 Throttle Speed, §14.3.5 Coasting)
- Segers, Analysis Techniques for Racecar Data Acquisition, 2nd ed. (SAE 2014): §4.2 Traction and Longitudinal Slip; §4.3 TCS and Slip Ratios
