# Track data and track characterisation

> Data tells you what kind of circuit you are at: speeds, gear usage, brake energy, full-throttle share, corner direction balance, g-g quadrant usage and bumpiness. Use these numbers to choose the baseline setup and tyre pressures before turning a wheel.

Area: Data Acquisition & Analysis · Starting level: L2 Practitioner · Updated 2026-11-16
Source page: https://race-engineer-academy.vercel.app/lesson/daq-track-characterisation

## L1 · Foundation

**Questions to answer about a track:**
- Fast or slow? (top speed, average speed, number of slow vs fast corners)
- Mechanical grip or aero grip dominant?
- Ratio of left to right corners?
- Hard on brakes? On tyres? On the engine?
- Which gears are used most?
- Smooth or bumpy, kerb-heavy?

Some answers come from the layout; the rest from a single lap of data. Segers' Nogaro (3.45 km, 13 turns, 5 left/8 right) with a GT3 car: top speed 256 km/h, average 163 km/h, minimum 67 km/h, 22 gearshifts per lap, max lateral 2.37 g in left-handers (the fast ones) vs 2.00 g in right-handers, max acceleration 0.84 g, max braking −1.95 g.

**Speed and gear histograms** show how much of the lap is spent in each speed band and gear – a direct pointer to aero level and gearing. A track spending most time above 180 km/h rewards downforce and platform; one dominated by 60–120 km/h rewards mechanical grip and traction.

**Full-throttle share** indicates engine and fuel stress and the drag/downforce trade-off. Indicative GT3 orders of magnitude (threshold-dependent; check your own team data): Monza roughly 65–75 %, Spa 55–65 %, Hungaroring or Zandvoort 40–50 %. The one sourced figure is Segers' Nogaro GT3 example at about 26 % of lap time at full throttle (he defines full throttle as > 95 %). Always state the threshold – 98 % versus 100 % throttle can move the figure by several points.

## L2 · Practitioner

**Track metrics from data.**

**Brake energy per lap.** Sum the kinetic energy removed in each braking zone:

$$E_{brake} \approx \sum_{zones} \tfrac{1}{2} m \left(V_{start}^2 - V_{end}^2\right)$$

A 1300 kg GT3 braking from 270 to 90 km/h sheds about 3.3 MJ of translational kinetic energy in one stop. For brake thermal sizing refine it: $E_{brake} \approx \tfrac{1}{2} m_{eq}(V_{start}^2 - V_{end}^2) - \int F_{drag}\,ds - E_{engine} - E_{regen}$, with $m_{eq} \approx 1.03$–$1.05\,m$ for wheels, discs and driveline inertia. Drag is ~10 % of the braking force at the start of a stop from 270 km/h; engine braking and hybrid regeneration take their share too. Rank tracks by total brake energy and peak energy per stop to choose brake ducts, pad compounds and disc sizes.

**g-g quadrant usage.** Split the friction circle into four quadrants (traction/braking × left/right) and compute % of lap time in each:

$$T_{Q} = \frac{100}{t_{lap}}\int_0^{t_{lap}} c_Q(t)\,dt$$

At Nogaro the GT3 car spends ~34 % of the lap in Q1 (traction out of right-handers), ~32 % in Q2 (traction out of left-handers), ~22 % in Q3 (braking into right-handers) and ~12 % in Q4 (braking into left-handers). Segers reads this as the **left-rear** (outside rear on right-hand exits) working hardest, so it may need a lower cold pressure to reach the target hot pressure. Treat that as a hypothesis, not a conclusion:
- Q1 and Q2 are close, so time alone hardly separates LR from RR – and the fastest, highest-energy corners at Nogaro are left-handers (2.37 g vs 2.00 g), which load the right-side tyres.
- A sign-only gate puts straight-line acceleration on the straights into a traction quadrant. Add deadbands (e.g. $|G_{lat}|$ > 0.3 g and $|G_{long}|$ > 0.1 g) so straights drop out.
- Time is not tyre work: a 0.2 g roll-on counts the same as a 2.4 g sweeper. Weight by combined g ($\int |g|\,c_Q\,dt$) or by estimated tyre power.
- Confirm with measured hot pressures and temperature rise per corner before setting cold-pressure offsets.

The time split still ranks setup priorities: a change that helps traction is worth more here than one that only helps braking into left-handers.

**Bumpiness.** Average absolute damper velocity per lap (same sampling rate and calculation rate between datasets!) compares tracks. It also rises with vehicle speed – for a typical road spectrum the damper-velocity input grows roughly with $\sqrt{V}$, so a track driven 20 % faster reads ~10 % bumpier on an identical surface – and with kerb use and setup. Compare in speed bands, gate out kerb strikes and keep the setup fixed. Gate it by phase – braking (long g < 0) or traction in corners (|lat g| > 0.5, long g > 0) – and colour a track map with it to see where bumps hurt.

**Direction balance.** Asymmetric tracks (mostly right-handers) may justify asymmetric setups where permitted: cross-weight, camber, cold pressures per corner. Segers' simulation found an optimum cross-weight of ~49.5 % at Interlagos, depending on left/right asymmetry and quadrant usage.

## L3 · Advanced

**Building a track database.** For each circuit store: lap length, corner list with minimum speeds and radii, speed/gear histograms, brake energy per stop and per lap, full-throttle %, quadrant usage, bumpiness per sector, kerb usage, elevation profile, typical ambient/track temperatures by session time, surface abrasiveness (wear rates from previous events), and grip evolution through the weekend. This becomes the input for setup baselines, tyre pressure targets and simulation track models.

**Interpreting track character for setup:**
- **High full-throttle %, long straights:** low drag, gear ratios for top speed, platform stability at speed, fuel consumption high.
- **High brake energy, repeated heavy stops (Montreal-type, Monza chicanes):** brake cooling, pad wear and brake-temperature management in races; braking stability (rear) is a key setup objective.
- **Quadrant asymmetry:** tyre pressures and cambers per corner, compound choice where allowed (some series allow different compounds left/right on ovals).
- **Bumpiness concentrated in braking zones:** lower high-speed bump damping or more ride height to protect the platform; check bump-rubber contact.
- **Kerb-heavy chicanes:** consider kerb-riding compliance vs aero platform stiffness trade-off.

**Track evolution.** Rubber build-up typically improves lap time by 1–2 % over a weekend on a green track; rain washes it away. Temperature changes of 10–15 °C in track temperature shift tyre working windows and balance (often more oversteer as rears overheat). Your track metrics should be tagged with conditions so you compare like with like.

**Limitation:** track metrics are car-dependent. A track that is "aero" for a GT3 may be "mechanical" for an F4 car with little downforce; always derive them for your car class.

## Key formulas

**Brake energy per stop**

$$E_{stop} \approx \tfrac{1}{2} m_{eq} \left(V_{start}^2 - V_{end}^2\right) - \int F_{drag}\,ds$$

- m_{eq}: vehicle mass plus rotating inertia, ≈1.03–1.05 m (kg)
- V_{start}, V_{end}: speeds at brake on/off (m/s)
- F_{drag}: aerodynamic drag during the stop (N)

**Time in g-g quadrant (% of lap)**

$$T_{Q} = \frac{100}{t_{lap}}\int_0^{t_{lap}} c_Q(t)\,dt$$

- c_Q: 1 when |G_lat| and |G_long| exceed their deadbands with the quadrant’s signs, else 0

## Trackside takeaways

- One lap of data characterises a track: speeds, gear use, brake energy, full-throttle %, quadrant usage, bumpiness.
- Quadrant usage predicts which tyre should run hottest; use deadbands and energy weighting, and set cold-pressure offsets from measured hot pressures.
- Prioritise setup changes for the quadrant/phase where the car spends the most time.
- Compare bumpiness metrics only at identical sampling and calculation rates.
- Tag track metrics with conditions; rubber and temperature change the track through a weekend.

## By car category

### GT3

Brake energy and quadrant usage predict per-corner cold-pressure offsets (confirm them with measured hot pressures) – with mandatory minimum pressures in some series, the hardest-working tyre still needs careful targeting.

### IndyCar

Ovals are the extreme of directional asymmetry: stagger, asymmetric cambers and cross-weight are standard; road and street courses are characterised conventionally.

### Super Formula

Suzuka-type high-speed tracks: aero and platform dominate; time in fast-corner quadrants is the priority.

### Formula 4

Low downforce makes nearly every track mechanical-grip dominated; speed histograms mainly guide gearing.

### Hypercar (LMH/LMDh)

Energy recovery per lap and deployment zones depend on braking zones; brake energy split between friction brakes and hybrid recovery is part of track characterisation.

### TCR

Front-axle braking and traction workload: quadrant analysis shows which front tyre is the limiting one at each track.

## References

- Segers, Analysis Techniques for Racecar Data Acquisition, 2nd ed. (SAE 2014): Ch. 18 Racetrack Characterization (§18.1–18.5)
- Segers, Analysis Techniques for Racecar Data Acquisition, 2nd ed. (SAE 2014): §15.4 A Worked out Example (cross-weight optimum and track asymmetry)
