-150-100-500+50+100+150-1-0.500.5SHAFT VELOCITY mm/s (− REBOUND · + BUMP)F kN-2-1.5-1-0.50+0.5+1+1.5 NOW 0.0 BUMP PK 0.0 REB PK 0.0kN
REBOUND CLICKS
BUMP CLICKS
The shaft: its speed, not its position, sets the forceCrank 1.00 Hz × ±25 mm → peak 157 mm/sA crank damper dyno. The scotch yoke strokes the shaft ±25 mm in an exact sine, so the peak shaft speed is 2π·f·25 mm (157 mm/s at 1 Hz); the load cell over the damper reads the force. The chart plots force against velocity: bump (compression) up and right, rebound down and left. The curve is digressive: 7.6 N per mm/s in bump and 12.2 in rebound up to a knee near 45 mm/s, then only 3.0 and 4.6. Clicks count out from closed: opening a clicker softens the low-speed slope and moves the knee out, while above the knee the curves close up. Drawn at half speed.