# Tatuus F4-T421: setup adjustables and regulations

Formula 4 · FIA F4 Gen2 championships (Italian F4, F4 Spain, British F4, Euro 4, F4 Middle East/UAE and others) · Updated 2026-11-07
Source page: https://race-engineer-academy.vercel.app/cars/tatuus-f4-t421

The second-generation FIA F4 car (2022 on), used by most F4 championships worldwide. It has a **carbon tub with halo**, a **1.4 L turbo four (Abarth/Autotecnica FTJ, ~160–180 hp depending on series)** and a **Sadev SLR75-14 6-speed sequential with an *open* differential (no LSD)**. Suspension is pushrod/twin damper/spring at both ends with Andreani 2-way dampers and blade-adjustable ARBs.

For a junior car, the T421 has real engineering content. The **Tatuus user manual (v2.1.0)** publishes spring options with wheel rates, ARB roll stiffness tables, motion ratios, wing tables and aero sensitivity maps. That makes it the best car in this list for learning to **quantify** a setup change. The open diff and ~570 kg (with driver) make **inside-rear wheelspin and mechanical grip** the dominant topics, together with tyre pressures on spec slicks.

## Specification

- mass: ~570 kg minimum including driver (series regulations); ballast locations 15 kg + 5 kg max
- power: ~160–180 hp depending on series and engine supplier
- engine: Abarth / Autotecnica Motori FTJ 1.4 L turbocharged inline-4 (series-dependent engine supplier)
- gearbox: Sadev SLR75-14 6-speed sequential; standard ratios 2.50 / 1.88 / 1.50 / 1.25 / 1.04 / 0.87, final 31/10
- differential: Open differential (no limited slip) per Tatuus manual
- tyres: Series-spec slicks (supplier varies by championship)
- aero: Front wing with shim-adjustable flap (3/5/7°) and optional 15 mm gurney; rear wing 2–21° in 20 positions (A1–D5); datum balance ~40 % front
- brakes: TM calipers; master cylinders 19.05 mm front / 20.68 mm rear; cockpit bias knob
- electronics: Spec ECU and dash; optional damper potentiometers and accelerometer; no TC/ABS
- chassis: Carbon/Al-Nomex honeycomb monocoque, halo; pushrod twin dampers/springs front and rear; Eibach 36 mm springs

## What can be adjusted

| System | Parameter | Range | Freedom | Notes |
|---|---|---|---|---|
| Springs & ARB | Front springs | 700 / 900 / 1000 / 1100 lb/in (≈10.2–16.0 daN/mm at the wheel from k·MR²); MR (damper/wheel) ≈ 0.91, quoted in the Tatuus manual as 1.1 wheel/damper. Wheel rate = k·MR² | limited by series rules | Front ride frequency and aero platform. Baseline 700 lb/in. Stiffer front holds front-wing height under braking (front wing is ground-effect sensitive) but costs mechanical grip over bumps. |
| Springs & ARB | Rear springs | 700 / 900 / 1000 / 1100 lb/in (≈8.1–12.7 daN/mm at the wheel from k·MR²); MR (damper/wheel) ≈ 0.81, quoted in the Tatuus manual as 1.23 wheel/damper | limited by series rules | Baseline 900 lb/in. With an open diff, a softer rear helps keep the inside rear loaded on exit (less wheelspin). |
| Springs & ARB | Front anti-roll bar | 22 or 25 mm bar × 3 blade lengths → ~1,600–3,600 daN·m/deg roll stiffness at ground | limited by series rules | Big range: 22 mm soft blade to 25 mm stiff more than doubles front roll stiffness. The manual derives it as bar torsion stiffness × (bar twist per degree of chassis roll)², e.g. 19,642 daN·mm/deg × 9² ≈ 1,590 daN·m/deg (one soft-bar setting). For comparison, the 700 lb/in front springs give only ~200 daN·m/deg (k_w·t²/2 with a ~1.51 m front track), so the bar dominates front roll stiffness. Baseline 22 mm, blades S/S. Use blade steps for fine LLTD changes. Stiffer front = more understeer, sharper response. |
| Springs & ARB | Rear anti-roll bar | 10 or 14 mm bar × 3 blade lengths → ~50–364 daN·m/deg | limited by series rules | Rear bar is small relative to the front, so most of the roll stiffness is at the front. Baseline 14 mm H/H. Stiffening the rear rotates the car but loads the inside rear less: watch open-diff wheelspin on exit. |
| Springs & ARB | Spring preload | Platform thread pitch 1.5 mm/turn | free | Sets ride height/corner weights together with pushrod. Springs must always be preloaded (never loose). |
| Dampers | Dampers (Andreani 2-way) | Bump 12 clicks, rebound 16 clicks (0 = full hard); some series restrict | limited by series rules | Baseline F: bump 10 / reb 12; R: bump 6 / reb 6 (clicks from closed). Rebound controls load transfer rate on entry/exit. Many national series allow clicks but not valving changes. |
| Geometry | Ride height (pushrod) | +1 turn = +5.4 mm front / +6.5 mm rear | free | Baseline 18/38 mm (reference plane). Aero datum is FRH 15/RRH 35 mm. Rake shifts balance forward. Watch skid wear limits. |
| Geometry | Camber (shims) | +1 mm shim = +0.42° front / +0.30° rear; 0–13 mm front, 0–11 mm rear | free | Baseline −4.0° front, −3.0° rear. Adjust on tyre temperatures and on any supplier camber limits. |
| Geometry | Caster | +1 turn = +0.47°; nominal 9.4° | free | More caster increases camber gain with steer and steering weight. Rarely changed after baseline. |
| Steering | Toe (front / rear) | +1 turn = 1.12° front total / 1.0° rear total | free | Baseline +20′ front (toe-out in Tatuus convention), 0° rear. Small toe changes have large effect at this weight. |
| Steering | UMP (pushrod pick-up on upright) | UMP STD or UMP +15 mm | limited by series rules | Moves the front pushrod pickup relative to the steer axis, changing wheel drop with steer (jacking) and therefore weight transfer and steering effort with lock. UMP +15 reverses the inner/outer drop pattern. Affects slow-corner balance. |
| Geometry | Rear suspension pick-up position | Homologated options (e.g. BE23 / BE24) | limited by series rules | Changes rear geometry (roll centre/anti-squat). Baseline BE24. Event-level choice. |
| Aero | Front wing flap angle | 3° / 5° / 7° shims | limited by series rules | Main aero balance tool at the front. Datum is 5° with GF15. The manual gives % sensitivity of balance per step. |
| Aero | Front wing gurney (GF15) | Homologated 15 mm gurney on/off | limited by series rules | Adds front load. Rear gurneys are not allowed by FIA F4 regs. |
| Aero | Rear wing angle | 2–21°, 20 positions (A1–D5) | limited by series rules | Baseline A5 (6°). Datum C1 (12°). Each step ~1° changes rear downforce and drag. Choose for track speed. |
| Brakes | Brake bias | 1 turn clockwise = +1.5 % front (standard master cylinders) | free | Driver-adjustable via knob. Bias displayed on dash page 2 as front/(front+rear) pressure %. |
| Brakes | Master cylinders / bias cable | Standard 19.05/20.68 mm; bias cable standard or short | limited by series rules | The master-cylinder sizes set the bias range and the pedal-force-to-pressure gain. Change only for driver pedal feel (light junior drivers may need more pressure per kg of pedal force), then re-check the bias range. |
| Engine | Engine | Spec, sealed | fixed | No maps or power adjustment. Engines are usually allocated/rotated by the series to equalise performance. |
| Gearbox | Gear ratios | Standard stages; optional stages listed by Tatuus, but series normally fix ratios | fixed | With fixed ratios, gearing issues become shift-point and line choices. Teach drivers to read the rev range through each corner. |
| Differential | Differential | Open differential | fixed | No LSD: inside-rear wheelspin out of slow corners is managed by rear roll stiffness, damping and driver throttle. |
| Tyres | Tyre pressures | Within supplier window | free | Light, low-downforce car on hard-ish junior slicks: pressures strongly affect warm-up and grip. Short races mean tyres must work on lap 1. Set start pressures from the previous session's hot pressures and the track temperature trend. |
| Tyres | Tyre allocation | Limited sets per event (series rules) | set by BoP/homologation | Usually one or two new sets per weekend. Plan which session gets new tyres (qualifying) and run practice on used sets. |
| Geometry | Ballast | Max 15 kg in position 1, 5 kg in position 2 (Tatuus) | limited by series rules | Light drivers carry ballast to reach the minimum weight. Its position shifts the weight distribution, so put it where it helps the balance and keep it as low as possible. |

## Regulations and BoP

- **FIA F4 Gen2** (Art. 275 F4 regulations): spec Tatuus T421 chassis with halo, series-specific engine supplier, single tyre supplier per championship.
- **No TC/ABS** and **open differential** per Tatuus spec.
- **No gurney flaps on any rear aerofoil** (FIA technical regulation, as noted in the Tatuus manual); front-wing gurney only as homologated part.
- Each championship's technical regulations define the setup freedom (e.g. damper clicks, spring list, ratio stages). The Tatuus user manual lists all parts, ranges and baseline settings.

## Engineering focus

- Quantifying setup changes with the manual's wheel-rate, roll-stiffness and aero-sensitivity tables (e.g. computing LLTD per ARB blade)
- Mechanical grip and exit traction with an open differential
- Aero balance with front flap (3/5/7° + gurney) and rear wing (20 positions)
- Tyre pressures and warm-up on spec slicks in short races
- Coaching junior drivers using data: braking, minimum speed, throttle application

## Typical complaints and first fixes

- Inside-rear wheelspin on slow exits (open diff) → Soften rear ARB (thinner bar/longer blade) or rear springs, coach progressive throttle
- Mid-corner understeer in slow corners → Softer front ARB blade, check front camber/pressures; UMP option if the car is lazy at big steering angles
- High-speed understeer → One front flap step up (or add gurney), more rake, or one rear-wing position down
- Front lock-ups → Bias rearward (1 turn = 1.5 %), check front pressures and brake temperatures
- Snap oversteer on entry → Bias forward, more rear wing, rear toe-in, soften rear rebound
