# Mercedes-AMG GT3 Evo: setup adjustables and regulations

GT3 · GT World Challenge (Pirelli), IMSA GTD/GTD Pro (Michelin), FIA WEC LMGT3 (Goodyear), DTM, Nürburgring, national GT3 · Updated 2026-11-07
Source page: https://race-engineer-academy.vercel.app/cars/mercedes-amg-gt3-evo

The Mercedes-AMG GT3 Evo (from 2020) is the most widely sold current GT3 platform. It has a **front-mid-mounted 6.2 L naturally aspirated V8** (~550 PS / 650 Nm before BoP) with a rear-mounted 6-speed sequential transaxle. It is known for **very good stability, braking and high-speed performance**, a long wheelbase and a heavy front end. Like the BMW, it can understeer in slow corners.

Electronics include Bosch M5 ABS with **12 intervention stages** and AMG traction control. The dampers are adjustable for bump and rebound and the ARBs are configurable. The NA V8's linear torque makes it relatively easy for Bronze drivers.

## Specification

- mass: ~1,285 kg or less (AMG data); race minimum set by BoP
- power: ~550 PS @ 7,300 rpm, ~650 Nm @ 4,800 rpm before BoP; output set by BoP (restrictor)
- engine: AMG M159 6,208 cc naturally aspirated V8, front-mid mounted, dry sump
- gearbox: 6-speed sequential racing transaxle (Hewland-built per public sources), pneumatic paddle shift
- differential: Mechanical limited-slip differential
- tyres: Series spec; 18-inch forged wheels
- aero: Large rear wing, splitter and diffuser; Evo revised aero for reduced pitch sensitivity
- brakes: Steel discs, racing calipers; Bosch M5 ABS with 12 stages
- electronics: Bosch ECU, Bosch M5 ABS (12 stages), AMG TRACTION CONTROL, automatic data logging, auto engine start on air-jack drop
- chassis: Aluminium spaceframe with steel cage; double wishbones; 120 L tank; 4,746 mm long

## What can be adjusted

| System | Parameter | Range | Freedom | Notes |
|---|---|---|---|---|
| Springs & ARB | Front anti-roll bar | Configurable positions on homologated bars | limited by series rules | Heavy front end: soften front bar for slow-corner front grip. Stiffen for high-speed directional response. |
| Springs & ARB | Rear anti-roll bar | Configurable positions on homologated bars | limited by series rules | Stiffen rear to rotate in slow corners. The NA V8 is gentle on traction, so there is margin to stiffen the rear before exit suffers. |
| Springs & ARB | Springs (front / rear) | From AMG Customer Racing range | limited by series rules | Platform choice. The car is sensitive to front ride height for aero balance. |
| Dampers | Dampers (bump / rebound) | Adjustable compression and rebound | free | Use front rebound for entry stability and rear bump for exit. The heavy front benefits from controlled front LS bump on turn-in. |
| Geometry | Ride heights (front / rear) and rake | Free within homologated travel; some series/BoP set minimum heights | limited by series rules | The main aero balance tool on a GT3: +1 mm rear ride height (or -1 mm front) moves aero balance forward roughly 0.3–0.5 %. Check BoP/series minimum heights and plank/skid rules before chasing rake. Always re-check heights hot, with fuel load, as measured on the setup plate. |
| Geometry | Camber (front / rear) | Typically −3.5 to −4.5° front, −2.5 to −3.5° rear | free | Set on tyre-temperature spread (aim ~8–12 °C inner-to-outer on hot pit temps) and on tyre-supplier camber limits where they exist. Front camber is a peak-lateral tool; too much costs braking stability and inner-shoulder wear. |
| Steering | Toe (front / rear) | Front ~0 to 2 mm total out; rear ~2–4 mm total in | free | Rear toe-in is a stability tool (more = more stable entry and power-down, but more drag and rear temperature). Front toe-out sharpens initial turn-in. Change in 0.5 mm steps — GT3s are very sensitive to rear toe. |
| Springs & ARB | Bump stops / packers | Packer thickness and bump-rubber type within supplier range | free | On high-downforce GT3s the bump rubber is effectively the aero platform spring at high speed. Adding packer lowers the speed or load at which the stop engages, so the axle gets stiffer at high speed and under heavy braking. More front packer holds the front up: less front downforce (aero balance moves rearward) and more front roll stiffness, so usually more high-speed understeer. To cure high-speed understeer, remove front packer or add rear packer to hold rake. Add front packer only when ride-height and aero-map data show the splitter/floor stalling or the skid touching. |
| Aero | Rear wing angle | Homologated range; BoP may cap | limited by series rules | Each step typically shifts aero balance ~1 % rearward and costs some top speed. BoP may cap the usable range. Balance wing against rake: wing for high-speed stability, rake/ride height for overall platform. |
| Brakes | Brake bias | Driver-adjustable balance bar (cockpit knob), typically ~54–60 % front | free | Move rearward for rotation on entry, forward for stability and to protect the rear under ABS. On ABS cars the bias also changes which axle ABS intervenes on first — check ABS activity per axle in the data, not just lock-ups. |
| Brakes | Master cylinder sizes | From the homologated/manufacturer list | limited by series rules | Changes pedal-force-to-pressure gain and the bias range available. Used to suit driver pedal feel (gentlemen drivers often want lower effort) rather than as a balance tool. |
| Brakes | Brake ducts / blanking | Homologated ducts; blanking/tape allowed | limited by series rules | Target disc and pad windows from the brake supplier. Over-cooling at cold tracks kills initial bite; under-cooling at Monza/Bahrain-type tracks causes fade and pad glazing. |
| Brakes | Pad compound | Manufacturer-approved compounds; series may restrict | limited by series rules | Endurance pads trade initial bite for wear and temperature stability. Change pads with care: driver pedal reference and ABS calibration both move. |
| Engine | Power / torque (restrictor, boost, power map) | Set by BoP each event | set by BoP/homologation | Not a setup tool. The engineer manages around it: gearing, fuel per lap and drag level. Some series use torque sensors to police power curves. |
| Engine | Engine / fuel maps | Homologated maps only (e.g. race, fuel-save, safety car) | limited by series rules | Fuel-save maps and lift-and-coast targets are strategy tools. The torque curve itself is homologated. |
| Engine | Traction control | AMG traction control, multi-stage | free | TC level is a real handling tool on exit: more TC hides poor traction, but heats the rears less. Set a baseline, then let the driver step through it as the tyres degrade. In data, compare wheel-speed slip with TC cut. |
| Brakes | ABS level | Bosch M5 ABS, 12 stages | free | Higher intervention = more stable but longer stops; lower = more aggressive. Wet races and worn tyres usually want more. Gentlemen drivers often benefit from a higher setting than pros. |
| Gearbox | Gear ratios / final drive | Homologated set; usually one ratio set per car | set by BoP/homologation | Effectively fixed. Gearing problems are solved through shift points and driving lines, not new ratios. |
| Tyres | Tyre pressures | Hot targets from the tyre supplier; some series enforce minimum pressures | free | GT3 tyres want a narrow hot window (often ~1.8–2.0 bar hot, supplier-dependent). Start pressures are chosen to hit target hot pressure by lap 2–3. Pressure is a balance tool only in small steps (~0.05 bar). |
| Tyres | Tyre compound / allocation | Single spec per series (Pirelli in GTWC, Michelin in IMSA, Goodyear in WEC LMGT3); limited sets per event | set by BoP/homologation | Plan the allocation: which sets for qualifying, which used sets for race stints and driver changes. |
| Geometry | Ballast / minimum weight | BoP weight, plus success ballast in some series | set by BoP/homologation | Ballast position (where the series allows) can be used to help weight distribution, but the amount is set by BoP. |
| Differential | Differential preload | Within homologated components | limited by series rules | Reduce for slow-corner rotation. Increase for entry stability on fast tracks. |

## Regulations and BoP

- **Homologated GT3** (Evo kit homologated for 2020).
- **BoP**: weight, restrictor/power, and series-specific fuel/energy, ride-height or wing constraints.
- **Tyres**: one supplier per series, allocation-limited.
- Driver categories by FIA rating; car widely used in Pro-Am/Am because of its forgiving behaviour.

## Engineering focus

- Slow-corner rotation: front ARB, diff preload, rear ARB, rake
- Using braking stability: ABS stage and bias to suit the driver
- Front aero platform: front ride height sensitivity, packers
- Tyre-pressure targeting and long-stint degradation
- BoP-aware strategy: fuel per lap with a thirsty NA V8

## Typical complaints and first fixes

- Understeer in hairpins → Soften front ARB, reduce diff preload, more front camber
- Lazy turn-in → Small front toe-out increase, more front LS bump damping, rake +1 mm
- Rear loose in fast direction changes → Rear toe-in, soften rear ARB, add wing
- Front tyre graining in cool conditions → Raise front pressures toward target, reduce front camber, review front ARB
- Long braking distances with Am driver → Lower ABS stage one step, move bias forward, coach initial brake pressure
