# Lamborghini Huracán Super Trofeo EVO2: setup adjustables and regulations

One-make Cup · Lamborghini Super Trofeo (Europe, North America, Asia) / World Final · Updated 2026-11-07
Source page: https://race-engineer-academy.vercel.app/cars/lambo-huracan-st-evo2

Lamborghini's one-make car (EVO2 from 2022). It has a **naturally aspirated 5.2 L V10 with 620 CV**, a sequential gearbox, steel brakes and a full carbon aero kit. Unlike the Porsche Cup car, it has **racing ABS (12 positions) and TC (9 positions)** plus 2-way Öhlins dampers. That gives the engineer more tools than in other Cup cars, although parts and settings are still restricted by the Super Trofeo rules.

The car is heavy-ish (~1,270 kg) with a high-revving V10 and a long-ish wheelbase (2,620 mm). It rewards a stable aero platform and good brake management. Pro-Am / Am line-ups mean the same car often has to suit two very different drivers.

The Huracán Super Trofeo EVO2 raced its final season in 2026; from 2027 Super Trofeo uses the twin-turbo V8 Temerario Super Trofeo, so check which car your series runs.

## Specification

- mass: ~1,270 kg (Lamborghini Squadra Corse data)
- power: 620 CV @ 8,250 rpm; 570 Nm @ 6,500 rpm
- engine: 5,204 cc naturally aspirated 90° V10, longitudinal, mid-mounted
- gearbox: 6-speed sequential (Lamborghini quotes Xtrac; some team spec sheets list Hor Technologie)
- differential: Mechanical limited-slip differential
- tyres: Pirelli slicks; 305/645-18 front on 11J, 315/680-18 rear on 12J
- aero: Complete carbon aero kit with quick-release fasteners; adjustable rear wing
- brakes: Steel discs (front 380×35 mm); racing ABS
- electronics: MoTeC M182 ECU; racing ABS with 12 positions; TC with 9 positions; multifunction steering wheel
- chassis: Hybrid aluminium/carbon chassis, double wishbones with rigid bushes; wheelbase 2,620 mm; 118 L tank

## What can be adjusted

| System | Parameter | Range | Freedom | Notes |
|---|---|---|---|---|
| Springs & ARB | Front anti-roll bar | 6 positions | limited by series rules | Main mid-corner balance tool. One position typically gives a clear but small change. Stiffen for high-speed stability, soften for slow-corner front grip. |
| Springs & ARB | Rear anti-roll bar | 2 positions | limited by series rules | Coarse adjustment, so it is a track-type choice (soft for bumpy/slow tracks, stiff for fast/smooth) rather than a fine-tuning tool. Fine-tune with the front bar. |
| Springs & ARB | Springs | From the Lamborghini Squadra Corse list (series regulations) | limited by series rules | Platform choice per event. Stiffer front helps aero platform under braking, softer helps kerbs. |
| Dampers | Dampers (Öhlins TTX36, 2-way) | Bump and rebound clicks; front in-line, rear piggy-back | limited by series rules | Rebound controls how quickly load comes off the axle (entry/exit transients). Bump affects platform and kerb response. Start from the Squadra Corse baseline and change 2 clicks at a time. |
| Geometry | Ride heights / rake | Above series minimum heights | limited by series rules | Primary aero-balance tool along with the wing. Rake shifts balance forward but can make the rear floaty in fast corners. |
| Geometry | Camber | Within mechanical and series limits | limited by series rules | Tune on tyre temperature spread. The V10's weight sits well back, so rear camber is a big traction lever. |
| Steering | Toe (front / rear) | – | free | Rear toe-in for stability. Front toe for turn-in response, which drivers often find lacking with a stiff front bar. |
| Aero | Rear wing angle | Multiple homologated positions | limited by series rules | Balances high-speed stability and drag. Combine with rake to keep a consistent aero balance between fast and slow tracks. |
| Aero | Front splitter / dive planes | Spec bodywork | fixed | Not adjustable. Front aero load is tuned only with ride height/rake. |
| Brakes | Brake bias | Cockpit-adjustable balance | free | Use with ABS position: a slightly forward bias with a higher ABS step is the forgiving gentleman setting. Pros often run more rear bias and a lower ABS step for entry rotation. |
| Brakes | ABS level | 12 positions | free | More intervention = more stability, longer stops. Adjust for wet, worn tyres and driver ability. |
| Brakes | Pads / discs | Spec steel discs and pads | fixed | Manage temperatures with cooling and driving. Steel discs fade if cooling is under-specified for the track. |
| Engine | Traction control | 9 positions | free | The V10 is linear and progressive, so TC is mainly for worn rears and wet. Watch rear tyre temperature vs TC level. |
| Engine | Engine power / maps | Spec, sealed | fixed | No BoP between cars. |
| Gearbox | Gear ratios | Spec 6-speed | fixed | Not adjustable. |
| Differential | Differential | Spec mechanical LSD | fixed | Not a setup item in Super Trofeo. Tune exit with rear ARB, TC and dampers. |
| Tyres | Tyre pressures | Within Pirelli recommendations | free | Key lever. Hot-pressure targeting across Pro-Am driver stints with different pace is a real challenge. |
| Tyres | Tyre allocation | Limited Pirelli sets per event | set by BoP/homologation | Plan sets across two races and qualifying per weekend. |
| Geometry | Corner weights | Spring perches | free | Set with the driver aboard. In Pro-Am pairings consider the heavier driver. |

## Regulations and BoP

- **One-make**: car supplied by Lamborghini Squadra Corse. The Super Trofeo technical regulations list the allowed settings and parts.
- **No BoP between cars**. Driver categories (Pro, Pro-Am, Am, Lamborghini Cup) are classified separately.
- **Tyres**: spec Pirelli, limited allocation.
- **Sealed**: engine, ECU calibrations, gearbox internals.
- Exact setup freedoms vary by regional series and season: check current regulations.

## Engineering focus

- Using the extra tools (2-way dampers, 12-step ABS, 9-step TC) to suit two drivers of very different levels
- Aero platform consistency: rake and wing against the coarse 2-position rear ARB
- Brake temperature and steel-disc fade management on heavy-braking tracks
- Tyre pressure targeting across stints of different pace
- Driver coaching vs the pro benchmark in the same car

## Typical complaints and first fixes

- Understeer mid-corner in slow sections → Soften front ARB (6-position bar), add front camber, check front hot pressures
- Rear unstable on entry → Bias forward, raise ABS level one step, more rear toe-in
- Car bottoms/porpoises in fast compressions → Raise ride height a little or add bump clicks; check bump-rubber engagement
- Wheelspin on exit as tyres wear → Increase TC by 1–2 steps, soften rear damper rebound/bump on exit transient, review rear pressures
- Brake fade late in race → Open brake ducts, coach earlier/lighter braking for the Am driver, check pad wear
