# Hyundai Elantra N TCR: setup adjustables and regulations

TCR · TCR World Tour / TCR Europe / national TCR series / IMSA Michelin Pilot Challenge (TCR) · Updated 2026-11-07
Source page: https://race-engineer-academy.vercel.app/cars/hyundai-elantra-n-tcr

Hyundai Motorsport's TCR car (from 2021). It is **front-wheel drive** with a **2.0 L turbo four (350 hp before BoP)**, a 6-speed sequential gearbox and a **mechanical diff with an external preload adjuster**. TCR is designed for cost control: engine and gearbox are homologated, there is no ABS, and setup is mostly about **making a FWD car rotate** (rear ARB, rear toe, rear camber, rear rebound) and **getting the power down through the front tyres** (diff preload, front camber, pressures).

The 1,265 kg minimum (with driver) is set by TCR rules. **BoP** (ballast and power) balances the different manufacturers.

## Specification

- mass: 1,265 kg minimum including driver (TCR regulations); BoP ballast on top
- power: 350 hp @ 7,000 rpm; 450 Nm @ 3,500 rpm (Hyundai data, before BoP)
- engine: Hyundai Motorsport 2.0 L direct-injection turbocharged inline-4
- gearbox: 6-speed sequential with pneumatic paddle shift; cerametallic twin-disc clutch
- differential: Mechanical LSD with external preload adjuster
- tyres: Series spec (single supplier per series); 10×18-inch wheels
- aero: Homologated TCR body kit, splitter and rear wing
- brakes: Front 380 mm ventilated discs with 6-piston calipers; rear 278 mm discs with 2-piston calipers; hydraulic handbrake
- electronics: Hyundai ECU and power management; configurable dash/logger; no ABS
- chassis: Steel body with high-tensile cage; MacPherson front, four-arm multilink rear; wheelbase 2,750 mm; 100 L tank

## What can be adjusted

| System | Parameter | Range | Freedom | Notes |
|---|---|---|---|---|
| Springs & ARB | Front anti-roll bar | Homologated positions | limited by series rules | On a FWD car a stiff front bar unloads the inside front, which hurts traction on exit. Softening the front helps exit traction and mid-corner grip, at the cost of response. |
| Springs & ARB | Rear anti-roll bar | Homologated positions | limited by series rules | Main rotation tool. TCR cars often run very stiff rear bars, sometimes lifting the inside rear, so the car rotates on entry and mid-corner. |
| Springs & ARB | Springs | From Hyundai Motorsport range | limited by series rules | Stiff rear springs increase rotation. Front springs set the platform under braking and kerb behaviour. Front grip is everything, so avoid over-stiffening the front. |
| Dampers | Dampers | Adjustable homologated dampers (click range per supplier) | limited by series rules | Rear rebound is a strong entry-rotation tool on FWD: as the rear extends under braking, stiffer rebound transiently reduces rear tyre load, so the rear goes light faster on turn-in. Soften it if the rear steps out or locks. Front bump controls kerb-riding and platform under braking. |
| Geometry | Ride height / rake | Adjustable; series/BoP minimums apply | limited by series rules | More rake (rear up) helps rotation on entry and puts load on the front. Watch the MacPherson geometry change when the front is set very low. |
| Geometry | Camber (front / rear) | Within homologated range | limited by series rules | Front camber: the front tyres drive, brake and corner, so it is a compromise between braking/traction (less camber) and lateral grip (more camber). Less rear camber = less rear grip = more rotation. |
| Steering | Toe (front / rear) | – | free | Rear toe-out increases rotation but makes the car nervous at high speed. Many FWD setups run near-zero or slight rear toe-out. Front toe-out sharpens turn-in but heats the front tyres. |
| Aero | Rear wing angle | Homologated range | limited by series rules | Modest aero. The wing is mainly for high-speed stability (FWD race cars can be loose at high speed after a rotation-biased mechanical setup). |
| Brakes | Brake bias | Balance bar | free | Rearward bias helps rotation on entry, but with no ABS and a light rear it can lock the rears quickly. The driver adjusts as fuel burns and tyres wear. |
| Brakes | Brake cooling / pads | Homologated parts | limited by series rules | Front brakes do most of the work on a nose-heavy FWD car. Watch front disc temperature at heavy-braking tracks. |
| Engine | Power (BoP) | BoP power % | set by BoP/homologation | Not a setup item. |
| Gearbox | Gear ratios | Homologated set | set by BoP/homologation | Not adjustable. |
| Differential | Differential preload (external adjuster) | External preload adjustment | limited by series rules | Most important FWD-specific tool. More preload = better traction (less inside-front spin) but more power understeer, torque steer and front wear. Less preload = better rotation, more inside wheelspin. Adjustable without stripping the gearbox, so it can be tuned between sessions. |
| Tyres | Tyre pressures | Within supplier window | free | The front tyres do almost everything and build pressure fastest. Set front start pressures lower than rear to arrive at target together. |
| Tyres | Tyre allocation | Series spec, limited sets | set by BoP/homologation | Front tyre wear is usually the race limit: plan sets and pressures for the race distance. |
| Geometry | BoP ballast | BoP weight | set by BoP/homologation | Set by BoP. Position as allowed; ballast toward the rear can help the balance of a nose-heavy car. |

## Regulations and BoP

- **TCR concept** (WSC Group): production-based FWD touring cars with homologated engine, gearbox and body kit.
- **BoP**: ballast and power adjustments, set per series.
- **Tyres**: single supplier per series, allocation-limited.
- Minimum weight mandated by TCR rules (1,265 kg including driver).

## Engineering focus

- Rotation of a FWD car: rear ARB, rear toe, rear rebound, rake
- Front tyre management: pressures, camber and diff preload for traction vs wear
- Braking stability without ABS on a light rear axle
- Torque steer and exit traction
- BoP-aware race planning (ballast, power)

## Typical complaints and first fixes

- Mid-corner understeer → Stiffen rear ARB, slight rear toe-out, reduce rear camber
- Inside-front wheelspin on exit → Increase diff preload, soften front ARB
- Rear lock-up and snap under braking → Bias forward, soften rear rebound, reduce rear toe-out
- Front tyre wear over a race → Reduce front camber slightly, lower diff preload, re-target front pressures
- Torque steer on exit → Reduce diff preload, check front toe and caster settings
