# Ferrari 499P (LMH): setup adjustables and regulations

Hypercar (LMH/LMDh) · FIA WEC Hypercar / 24 Hours of Le Mans · Updated 2026-11-07
Source page: https://race-engineer-academy.vercel.app/cars/ferrari-499p

Ferrari's Le Mans Hypercar (2023 on; won Le Mans 2023–2025). As an **LMH**, the whole car is Ferrari's own design. It has a **2,992 cc 120° twin-turbo V6 driving the rear wheels** and a **200 kW front-axle MGU**, so it is intermittently 4WD. The front motor may only deploy **above a BoP-defined speed (190 km/h dry and wet in the 2025 WEC BoP tables)**, and total system power is capped by BoP (e.g. **501 kW below 250 km/h**, Qatar 2025).

The rules are built around **performance balancing**: weight, power, power gain above 250 km/h, energy per stint (e.g. 897 MJ) and front-deployment speed are all BoP parameters, and aero is homologated within a performance window. Brake-by-wire blends front-MGU regeneration with friction braking, so the effective front/rear balance shifts with regen level and battery state. **ABS is not permitted; TC is.** The engineering work is mainly **energy management, brake-by-wire/regen calibration, tyre management with no warmers, and the aero platform within the homologated window**.

## Specification

- mass: BoP-set; e.g. 1,037 kg min. dry (WEC 2025 Qatar BoP); base regulation 1,030 kg
- power: Total ICE + MGU power at the wheels capped by BoP (~500 kW nominal; e.g. 501 kW below 250 km/h, Qatar 2025). When the 200 kW front MGU deploys, ICE torque is cut so the total stays within the cap
- engine: Ferrari F163CG 2,992 cc 120° V6 twin-turbo, stressed member
- gearbox: 7-speed sequential (Xtrac per public sources)
- differential: Rear limited-slip; front axle driven by the MGU (torque vectoring not permitted)
- tyres: Michelin (WEC spec), limited allocation; tyre warmers banned in WEC from 2024
- aero: Homologated bodywork within the ACO aero performance window; limited adjustable aero (rear wing)
- brakes: Carbon discs and pads; Brembo brake-by-wire blends front-axle MGU regeneration (up to 200 kW) with friction braking
- electronics: TC permitted, ABS not permitted; hybrid management; FIA-sealed torque sensors for power/energy metering
- chassis: Carbon monocoque; double wishbone pushrod suspension
- hybrid: 200 kW front-axle MGU with battery; front deployment only above BoP speed (190 km/h in 2025)

## What can be adjusted

| System | Parameter | Range | Freedom | Notes |
|---|---|---|---|---|
| Springs & ARB | Anti-roll bars (front / rear) | Within homologated parts | free | Mid-corner balance tool. Above the deployment speed the front axle is also driven, so front roll stiffness (inside-front unloading) affects front-MGU traction in fast corners. |
| Springs & ARB | Springs and heave elements | Within homologated parts | free | Heave stiffness controls ride height under aero load and therefore aero balance at speed. Stiffer front heave = more stable high-speed balance but worse over bumps (Sebring, Spa Eau Rouge compression). |
| Dampers | Dampers | Within homologated parts; clicks free | free | Platform and kerb compliance. LS for pitch and transients, HS for kerbs (Le Mans chicanes, Spa). |
| Geometry | Ride heights / rake | Within plank rules and homologated aero window | limited by series rules | Main balance tool. Total downforce is capped by the aero window, so rake is used more to set balance and sensitivity than to chase load. |
| Geometry | Camber | Within mechanical range and Michelin limits | free | With no tyre warmers, camber affects warm-up as well as peak grip. Too much camber slows warm-up on the outer part of the tread. |
| Steering | Toe (front / rear) | – | free | Rear toe-in for stability and power-down. Front toe adds warm-up heat on out-laps but costs drag on the Le Mans straights. |
| Aero | Rear wing / adjustable aero | Within the homologated range | limited by series rules | Aero adjustment is restricted to the homologated range so that the car stays inside its Cz/Cx window. Used to trim balance per track. |
| Aero | Aero configuration (Le Mans vs standard) | Homologated within ACO window; BoP-dependent | set by BoP/homologation | Le Mans uses its own BoP and drag level, so balance work restarts there. |
| Brakes | Brake-by-wire / regen blending | Calibration within regulations | limited by series rules | Brake-by-wire mixes regeneration and friction. Its calibration affects pedal feel and stability. Driver complaints of rear instability or inconsistent pedal often come from the regen blend, not the mechanical bias. |
| Brakes | Brake bias | Driver-adjustable | free | Regen on the front axle changes the effective balance, so the bias shown on the dash is not the full picture. Look at total front/rear braking torque in the data. |
| Brakes | Brake ducts | Homologated ducts; blanking allowed | limited by series rules | Carbon brakes need temperature management, especially at night and on cold out-laps. |
| Engine | Traction control | Driver-adjustable TC | free | TC is permitted (ABS is not). Below the deployment speed the car is RWD, so slow-corner exits behave like a RWD car. |
| Engine | Hybrid deployment / regen strategy | Front deployment only above BoP speed; total energy per stint limited | limited by series rules | The main race tool: where to deploy, how much to regen, and lift-and-coast targets to meet the stint energy. Small savings per lap add up to an extra lap per stint. |
| Engine | Power (BoP) | BoP max power below 250 km/h and power gain above | set by BoP/homologation | Not a setup item. It affects top speed and how drag level is chosen. |
| Engine | Energy per stint (BoP) | e.g. 897 MJ (Qatar 2025) | set by BoP/homologation | Sets stint length and fuel-save needs. Track it lap by lap against target in the data. |
| Gearbox | Gear ratios | Homologated ratios | set by BoP/homologation | Not adjustable. |
| Differential | Rear differential | Within homologated parts | limited by series rules | Entry stability vs rotation on the RWD part of the lap (below the deployment speed). |
| Tyres | Tyre pressures | Within Michelin limits | free | No warmers: start pressures and out-lap procedure decide how quickly the tyres reach their window. Also consider pressure build over double stints. |
| Tyres | Tyre allocation | Limited sets per event | set by BoP/homologation | Double- and triple-stinting is standard. The allocation forces strategy decisions in qualifying. |
| Geometry | Minimum weight (BoP) | BoP weight | set by BoP/homologation | Not a setup item. |

## Regulations and BoP

- **LMH** (FIA/ACO): manufacturer-designed car; aero homologated within the ACO performance window; limited adjustable aero.
- **BoP**: minimum weight, max power below 250 km/h, power gain above 250 km/h, front-deployment speed (190 km/h in 2025), max stint energy and refuelling time. Applied per event (e.g. WEC decision D09, Qatar 2025).
- **From 2026 the FIA/ACO no longer publish WEC BoP tables**; they go only to the teams. The 2025 figures quoted here are for orientation. Rivals' power and energy have to be inferred from GPS speed traces and stint lengths.
- **Hybrid**: 200 kW front MGU; deployment only above the BoP speed.
- **No ABS**; traction control permitted.
- **Tyres**: Michelin, limited allocation; no tyre warmers in WEC from 2024.

## Engineering focus

- Energy management: deployment, regen and lift-and-coast within the stint energy limit
- Brake-by-wire and regen blending calibration vs driver feel
- Tyre warm-up without warmers, and double-stint degradation
- Aero platform within the homologated window (heave, ride height, rake)
- BoP-aware strategy: stint length, refuelling time, drag level

## Typical complaints and first fixes

- Rear instability under braking → Review brake-by-wire/regen blend calibration; then bias forward, rear toe-in
- Slow tyre warm-up on out-laps → Raise start pressures, review camber/toe, coach out-lap procedure
- High-speed understeer → Check front ride height at speed against the aero map. If above the stall region: soften front heave / remove front packer or stiffen rear heave to keep rake, lower front ride height slightly. Stiffen the front only if the floor stalls or grounds
- Snap oversteer on slow exits (RWD below deployment speed) → TC up one step, soften rear ARB, adjust diff
- Stint energy over target → Set lift-and-coast targets per corner, revise deployment/regen strategy
